Top 8 Best 1 To 4 Pcie Splitter

NOTE The motherboard must be powered off before installation. GREAT EXTENDABILITY-Plugs directly to the board without any extender cable, can be fixed to the case. compatible with X4, X8, X16 slot. HIGH EFFICIENCY - This pci-express card has reduced the number of adapter and transfer line, one line directly to the interface, effectively reduce the interface interference and wire loss, to ensure data reliability, so as to improve work efficiency. HIGH STABILITY - The main control panel of this PCI expansion card uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, and the stability is higher. COMPATIBILITY - PCI-E 1 to 4 Riser Card, Supported OS HiveOS, DOS, Linux, Windows XP7810.. PORT QUANTITY - 4 X PCI-E USB, Only one cable to the slot, easy and convenient to settle and install.With IC heat radiator.. .

Quality PCIe Splitter solves the lack of PCI-e interface on the motherboard, and 1 can be expanded to 4. X1 bus interface is compatible with X4X8X16 interface.. Reliability Driver-free Design. Main control board adopts the direct power supply mode of the PCI Express interface, no external power cord is required, and the main control board power is not interfered by the outside world.. Safety Reduce the number of adapters and adapter cables. One wire is directly connected to the interface, effectively reducing interface interference and wire loss, ensuring data security.. Stability Adopting a plug-in design, it can be directly connected to the motherboard interface without an extension cord, and it can be fixed to the chassis.. Powerfully Motherboard IC plus radiator, multiple lines work at the same time to solve the heat dissipation problem. Supported operating systems HiveOS, DOS, Linux, Windows 7810XPVistaServer.. Warranty 15-day money-back guarantee service for new product. Feel free to ask us any question you want and well do our best to figure it out..

This extension is applicable to the mainboard PCI - E 1X slot, Please plug in the power cord for the floppy. When plug PCI - E extension must be computer broken wires plug again.. The form a complete set of wire rod is customized, never grab line to plug in. Remember that. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.. Please allow 1-3mm error due to manual measurement and make sure you do not mind before ordering.. Due to the original production of raw materials shortage and production batches are different, the card slot and the cable color will have some differences, but the card is the same function, please rest assured absolutely does not affect the normal use, hope to understand..

ItemPCI-E 1 to 4 Riser Card. BrandXT-XINTE. Product TypeLPE-4X Bus interfacePCI-E X1. System supportDOS,L INUX,WINXP,WIN7,WIN8,WIN10. Number of interfacePCIE-USB 4 Size120MM67MM57MM.

PCI-E 1 to 4 Riser CardThe bus interface is PCI-E X1, and compatible with X4, X8, X16 graphics interface, 1 interface can be expanded to 4 USB3.0 ports, which effectively solves the problem that the lack of PCIe interface on the motherboard. NOTE The adapter card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals.. Ultra-Large Aluminum HeatsinkThe ultra-large imported aluminum alloy heatsink can effectively dissipate excess heat, so that the adapter card is always at a normal temperature, and the operation is more stable.. Plug-in DesignThe PCI-E riser card adopts a plug-in design, which is directly connected to the motherboard interface for power supply. It can be fixed on the chassis without an extension cable, reducing the number of adapters and patch cords, effectively reducing interface interference and line loss, and ensuring data reliability and stability, improve work efficiency.. Strong StabilityThe main control board adopts the PCI-E interface for direct power supply, without an external power cord, so that the main control board is not interfered by the outside world. 4 USB 3.0 ports can work at the same time, backward compatible with USB 2.0 and USB 1.0, the stability is higher.. Wide CompatibilityThe total interface supports PCIE X1 X4 X8 X16 graphics card interface. The interface supports USB3.0 and is backward compatible with USB 2.01.0. Support DOS, LINUX, WINXP, WIN7, WIN8, WIN10 and other systems..

The PCI-E expansion riser card adapter is designed to convert 1 PCI-E 1X slot into 4 PCI-E 16X slots. The 4 PCI-E 16X slots could connect sound card, graphics card and network card simultaneously and work in an independent non-interfering way. It is the perfect and practical solution to instantly expand PCI-E slots in crowded systems or on the motherboards with limited PCI-E ports. Features 1-slot PCI-E 1X to 4 slots 16X riser card with high speed USB 3.0 cable.. imultaneously support 4 PCI-E 16X devices, non-interference. Customized for mining BTC. 2 layers PCB board design. Compliant with PCI express 2.0 1.1 specification. Solid capacitors supply stable power delivery. Reduced burden on the motherboard by simultaneous power supply from big 4Pin and SATA slots. Easy installation, fully plug and play, convenient and efficient..

PCI-E slot power solution, no extra power cable needed.. 4 Slots brings great extendability.Plugs directly to the board without any extender cable, can be fixed to the case.. PCI-E 1 to 4 Riser Card, Supported OS DOS, Linux, Windows XP7810.. Only one cable to the slot, easy and convenient to settle and install.With IC heat radiator.. Port Quantity 4 X PCI-E USB.

MAIN FUNCTION - PCI-E Riser effectively solve the insufficient PCI-E Riser card interface of the motherboard. One interface can be expanded to 4 interfaces to connect to the graphics card, which is your Bitcoin miner assistant. This pcie riser card is with PCI-E X1 compatible with X4, X8, X16 slot.. MAINBOARD POWER SUPPLY - The main control board adopts the PCI-E riser interface to directly supply power, no need to borrow an external power cord, so that the main control board power is not interfered by the outside world, and its more stable and efficient. PLUG-IN BOARD DESIGN - Pcie Riser Card adopts a plug-in board design, which is directly connected to the motherboard interface without an extension cord, and Pci Express 1x to 16x can be fixed to the chassis, greatly improving the stability and reliability. HIGH EFFICIENCY - Reduce the number of risers adapters and pcie riser adapter cables. One wire goes directly to the interface, effectively reducing excuse interference and wire loss, ensuring data reliability, and improving work efficiency. DATA COMPLETENESS - The Pci-e USB connector is gold-plated, which reduces interference between interfaces and enhances data integrity..

NOTE The motherboard must be powered off before installation. GREAT EXTENDABILITY-Plugs directly to the board without any extender cable, can be fixed to the case. compatible with X4, X8, X16 slot. HIGH EFFICIENCY - This pci-express card has reduced the number of adapter and transfer line, one line directly to the interface, effectively reduce the interface interference and wire loss, to ensure data reliability, so as to improve work efficiency. HIGH STABILITY - The main control panel of this PCI expansion card uses PCI-E interface direct power supply mode, and no external power line is needed, so that the main board power is free from external interference, and the stability is higher. COMPATIBILITY - PCI-E 1 to 4 Riser Card, Supported OS DOS, Linux, Windows XP7810.. PORT QUANTITY - 4 X PCI-E USB, Only one cable to the slot, easy and convenient to settle and install.With IC heat radiator..

Excellent ExtendabilityThe bus interface of this pcie splitter riser card is PCI-E X 1 that compatible with X4, X8, X16 graphics card interface. The 4-port USB PCI-E board is designed with 4 USB ports that support USB 3.0 and backward compatible with USB 2.0 and USB 1.0. The USB connector is gold-plated, which reduces interference between interfaces and provide fast data transmission speed, help you improve mining efficiency. Strong Stability for YouOur PCI-E to USB riser card is convenient to install and use and is designed with a LED indicator light to show the work status and the extension card board adopts the PCI-E interface for direct power supply, without an external power cord, make sure the main board power is free from external interference, so the stability is more higher. Advanced Heat Dissipation With aluminum alloy heat sink can effectively dissipate excess heat, make sure the pcie extender is always at a normal temperature. The pcie 1 to 4 riser miner card based on high-quality ASM1184 chip that can improve the stability and durability.. What You Get 1 X PCI-E 1 to 4 USB 3.0 Converter Card. Note This pcie splitter 1 to 4 pci riser card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals.This pcie 1 to 4 usb to pcie adapter can support DOS, LINUX, WINXP, WIN7, WIN8, WIN10 and other systems. . Reliable Support90 days no reason to return.Our pcie usb 3.0 card have been tested for functionality and durability by third parties before sent it to you,it is your best mining assistant If you have any questions about this pcie adapter, please feel free to contact us, we will definitely solve your problem within 12 hours..