Top 8 Best 14 Inch Bandsaw

Bandsaw Replacement Parts - Upgrade and replace old tires on your saw with Impresas Urethane Bandsaw Tires. Comes with 2 tires to protect your wheel so your saws run smoother and quieter. The Perfect Fit - The tire makes an excellent replacement for your band saw blades for wood and metal cutting fit saws that require a 14 x 1 x 0.095-inch tire. Strong and Efficient - Our orange 14-inch tires for bandsaw blades are made of heavy-duty, professional-grade urethane that outlasts standard rubber and plastic tires, increasing efficiency and life expectancy. Easy To Install - Easily install the traction bands for power wheels without adhesive. Stretch the tires to ensure a tight fit on your wheel. NOTE soak the tires in warm water before installing. Wide Range of Compatibility - Our tires are compatible with Jet bandsaw parts and Powermatic Bandsaws. Fits Jet JWBS-14DXPRO, JWBS-14CS, JWBS14OS, fits Grizzly G0457 G0555 G0555P G0555X G0580 T21005 G1019 G1019Z, fits Powermatic PWBS-14, PWBS-14CS.

Three Innovative, Patent Pending features make adjusting this redesigned band saw easier than ever before. Spring Loaded, Tool-Less Blade Guides easy fast setting of the guides without wrenches. Quick-Adjust Rip Fence adjusts for drift with the simple turning of a few knobs No tools needed. Quick-Lock Table Trunnion System handy lever and gear unlock and set table angles in seconds. Extra Tall Rip Fence Increased fence and re-saw bar heights of 6 give added support of lumber being ripped or re-sawn.

9.5-amp motor creates cuts up to 8.85 inches deep and 13-38 inches wide. Uses 100-34-inch blades anywhere from 18 to 1 inch wide. Spacious 21-12 x 15-34-inch work table bevels up to 45 degrees. Operates at two speeds of either 1480 or 3280 FPM. Includes a blade tension gauge, a circle cutting guide, a flexible work light, a 3-in-1 dust port, a fence, a 12-inch blade, and a miter gauge.

Large Work Piece Support 360 sq. in. cast iron worktable and 13 resaw capacity, so you can tackle more ambitious projects. Heavy Duty Design Large cast wheels provide a smooth and controlled cut. Efficient Dust Collection Dual 4 dust ports. Accurate Cutting Larger, machined aluminum fence surface with easily visible measurements. Greater Durability Robust stamped steel doors with welded steel pin hinges. Improved Work Piece Clearance Blade tensioning wheel is located on top of the saw.

Impeccable Cutting Proficiency Are you ready to cut into an unbelievable experience The woodworking bandsaw can cut a variety of materials, such as wood, metal, copper, aluminum, plastic, and more, with a maximum cutting height of 6 inches. Max. Throat Width 13.39 in 340 mm, Max.Sawblade Speeds 1050 mmin.. Continuously Viable The benchtop bandsaw comes with a continuously variable speed control function, allowing users to easily adjust the speed to their specific needs. It has a maximum speed of 960 RPM and a minimum speed of 480 RPM, which can be effortlessly adjusted.. High-performance Motor Our benchtop band saw features a powerful 1.5 HP 1100W excitation motor with a voltage of 120V. The silicon steel thickness is 3.62 inches, and the outer diameter is 5.02 inches. It also includes overheat protection to ensure smooth and safe operation of the machine.. Multi-angle Cutting The wood bandsaw features a tilting table that can be adjusted from 0 to 45, allowing for more flexibility when cutting. The sawtable size is 15.75 x 21.57 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.. Optimized Light Position It is designed with your everyday needs in mind. The work light's position is flexible and easy to operate, so you can adjust it to illuminate specific work areas without worrying about any shadows or dark spots, allowing you to work with precision effortlessly..

Cuts Larger Pieces Built-in 12 resaw capacity. Increased Strength and Rigidity Redesigned upper and lower cast iron frame. Longer Blade Life Upper and lower ball bearing guides reduce friction. Added Convenience Quick-release blade tension. Handy Storage Enclosed stand contains a storage shelf and easy access door. Greater Blade Tensioning High tension spring design.

Motor 1 HP, 110V220V, prewired 110V, single-phase, TEFC, 1725 RPM, 11A5.5A. Blade size 93-12 18 to 34 wide. Precision-ground cast-iron table size 14 x 14 x 1-12. Cutting capacity throat 13-12. Max. cutting height 6.

Motor 2 HP, 110V220V prewired 110V. Amps 15A at 110V, 7.5A at 220V. Table size 21-34L x 16-18W. Max cutting height 14. Deluxe 2-height resaw fence.

REDUCED VIBRATION Has precision-balanced nine-spoke cast iron wheels that creates smoother blade travel reducing vibration.. EXTENDED BLADE LIFE CARTER quick tension lever speeds blade changes, and the de-tension setting extends blade life during non-use.. CLEAN CUT LINES The built-in chip blower ensures clean, visible cut lines.. VISIBILITY 60-watt adjustable lamp, built into the body, provides direct light on blade and work piece while cutting bulb not included.. BLADE CONTROL Micro-adjustable dual-bearing blade guide system provides less friction and close blade control..

1 HP motor, pre-wired 110V 220V compatible, single-phase 11A at 110V, 5.5A at 220V. Max cutting height 6. Cutting capacity at throat 13-12. All ball bearing construction w Upper lower ball-bearing blade guides. Includes 38 blade, extruded aluminum fence and miter gauge.

Heavy duty steel frame design reduces flexing and features a superior finish and aluminum trunnion table support for long-lasting durability. 1 HP, 115V230V, 1 phase TEFC motor with 2 speeds 1,620 FPM and 3,340 FPM for wood and non-ferrous metal cutting. Two-speed pulley with easy tensioning system. Durable aluminum, rubber-coated upper and lower 9 spoke wheels are precision balanced for superior blade tracking. Oversized 15 34 in. x 18 78 in. precision ground cast iron table with t-slot miter capability tilts 3 left to 45 right with a positive stop at 90.