Top 8 Best 3 Inch Pvc Fittings

Connects 3 in. SD pipe to 3 in. SD pipe, to NDS parts that fit 3 in. SD connections such as Spee-D, 3, 5, 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 6 in. Square Grates, 3 4 in. Round Atrium Grates, Pop-Up Emitters. Adds a 90 turn from 3 in. Sewer Drain SD pipe to 3 in. SD pipe in non-pressurized drainage and sewer piping systems. Adds a 90 turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. SD pipe. Attach 3 in. SD pipe to one end of 90 elbow and 3 in. SD pipe to the other end also connects 3 in. SD pipe to select drainage products that accommodate 3 in. SD connections solvent weld to PVC components for a watertight connection. Comes with one PVC Elbow. Meets applicable ASTM standards..

Injection molded body in non-toxic durable white polyvinyl chloride PVC. Service temperature rated at 140F 60C. Normally used in the drainage portion of the DWV system only. Model number 193703AS.

White fittings that are used in potable water applications only. Intended for pressure use. For use where systems will not exceed 140 F. PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines. MADE IN THE USA For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..

No Assembly Required. Product Type Hose Pipe Fitting. Package Quantity 1. Tightly seals sewer main pipe with 6 diameters and up. No Batteries Required.

90-degree elbow for connecting two pipes or fittings at an angle. Hub ends for connecting to male unthreaded pipes or fittings. PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal. Smooth interior finish for reduced friction and material buildup. Meets specifications ASTM D2665 and D3311 for quality assurance.

Injection molded in non-toxic durable white polyvinyl chloride PVC.. Service temperature rated at 140F 60C. Normally used in the drainage portion of the DWV system only. Brand name Canplas.

Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system for trees, shrubs, flower beds, vegetable gardens, planter boxes, and hanging baskets. Tubing outside diameter OD is 0.250 in., internal diameter ID is 0.170. in. connect to main supply line with 14 in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant. As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated Tubing coil comes shrinkwrapped for convenience easy to access as needed. Poly tubing is constructed using a layering method for durability the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100 virgin content the middle layer is composed of recycled content. Comes with one 25 ft. coil of 14 in. poly supply tubing.

IMPORTANT NOTE - this is a 3 inch PVC vent screen with 3.5 inch outer diameter, so please note that PVC elbow, adapter or coupling is not included and must be purchased separately - check for compatible size to ensure correct fit for 3 inch outdoor vent termination. PATENTED - a small slot on the side of PVC drain screen is open allowing water condensation to slide downward and out of the screen vent termination cap outdoo. SIMPLE - PVC pipe cap requires no effort and easy to install by placing the PVC vent pipe cap round inside the hub of PVC elbow, coupling or rubber elbow coupling not included. TOUGH - stainless steel PVC pipe cover 3 inch won't corrode or rust as type 304 PVC vent screens prevents leaves, debris, insect, bug and wildlife from entering termination cap pipe. AIRFLOW - 3 inch PVC cap no obstruction allows maximum airflow through the pvc pvc mesh cap outdoor vent screen cover.

Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system for trees, shrubs, flower beds, vegetable gardens, planter boxes, and hanging baskets. Tubing outside diameter OD is 0.250 in., internal diameter ID is 0.170. in. connect to main supply line with 14 in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant. As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated Tubing coil comes shrinkwrapped for convenience easy to access as needed. Poly tubing is constructed using a layering method for durability the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100 virgin content the middle layer is composed of recycled content. Comes with one 25 ft. coil of 14 in. poly supply tubing.