Top 8 Best Artic Thermal Paste

WELL PROVEN QUALITY The design of our thermal paste packagings has changed several times, the formula of the composition has remained unchanged, so our MX pastes have stood for high quality. EXCELLENT PERFORMANCE ARCTIC MX-4 thermal paste is made of carbon microparticles, guaranteeing extremely high thermal conductivity. This ensures that heat from the CPUGPU is dissipated quickly efficiently. SAFE APPLICATION The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards. HIGH DURABILITY In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years. EASY TO APPLY With an ideal consistency, the MX-4 is very easy to use, even for beginners.

WELL PROVEN QUALITY The design of our thermal paste packagings has changed several times, the formula of the composition has remained unchanged, so our MX pastes have stood for high quality. EXCELLENT PERFORMANCE ARCTIC MX-4 thermal paste is made of carbon microparticles, guaranteeing extremely high thermal conductivity. This ensures that heat from the CPUGPU is dissipated quickly efficiently. SAFE APPLICATION The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards. HIGH DURABILITY In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years. EASY TO APPLY With an ideal consistency, the MX-4 is very easy to use, even for beginners.

Arctic Silver 5 contains over 88 thermally conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles.. Its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability. Bonus Tool will come in handy rather then getting your hands dirty. Coverage Area A 3.5g gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003 thick, the 3.5g gram syringe will cover approximately 16 square inches.. 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.

WELL PROVEN QUALITY The design of our thermal paste packagings has changed several times, the formula of the composition has remained unchanged, so our MX pastes have stood for high quality. EXCELLENT PERFORMANCE ARCTIC MX-4 thermal paste is made of carbon microparticles, guaranteeing extremely high thermal conductivity. This ensures that heat from the CPUGPU is dissipated quickly efficiently. SAFE APPLICATION The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards. HIGH DURABILITY In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years. EASY TO APPLY With an ideal consistency, the MX-4 is very easy to use, even for beginners.

99.9 pure micronized silver. Non-electrically conductive. Will not separate, run, migrate or bleed. Thermal conductance 350 000Wm2 degreesC 0.001 inch layer. Easy to apply and remove.

Arctic Silver 5 uses three unique shapes and sizes of Pure Silver particles to maximize particle-to-particle contact area and thermal transfer. Arctic Silver 5 contains over 88 percent thermally conductive filler by weight. Controlled triple-phase viscosity. Not electrically conductive. RoHS Compliant.

Enthusiast CPU Thermal Compound Premium Zinc Oxide based thermal compound for optimal thermal performance.. Cools your CPU and GPU install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures.. Improved CPU cooling ultra-low thermal impedance lowers CPU temperatures vs common thermal paste.. Installation Made easy An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler.. Filling the gap xtm50s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer.. Long Service Life XTM50s high-stability liquid compound lasts for years with no drying, cracking or change in consistency.. Safe For You And Your PC Non-conductive and contains zero volatile compounds..

EXTRA THIN BONDLINE Perfect filling of micro-pores leads to lower thermal resistance - and may lead to stronger adhesion. Please refer to uninstallation video 'How to Properly Remove a CPU Cooler'. MULTIPLE VARIANTS ARCTIC MX-5 is available in sizes ranging from 2 to 50 grams. Resealable packaging prevents the paste from drying out. Incl. spatula. SAFE TO USE ARCTIC MX-5 is completely metal-free, eliminating the risk of short circuits, discharges and corrosion damage to the radiator bottom. EASY APPLICATION Thanks to its viscosity, MX-5 is easy to apply. It spreads evenly and allows for a very thin layer regardless of the application method used. VERSATILE USES Can be used on CPUs, GPUs and power semiconductor components. Thanks to its excellent properties, the ARCTIC MX-5 can be used in many scenarios without hesitation. EXCELLENT RESULTS ARCTIC MX-5 can be applied in a particularly thin layer. In combination with its high thermal conductivity, this results in very low thermal resistance.

EXTRA THIN BONDLINE Perfect filling of micro-pores leads to lower thermal resistance - and may lead to stronger adhesion. Please refer to uninstallation video 'How to Properly Remove a CPU Cooler'. MULTIPLE VARIANTS ARCTIC MX-5 is available in sizes ranging from 2 to 50 grams. Resealable packaging prevents the paste from drying out. Alternatively available with spatula. SAFE TO USE ARCTIC MX-5 is completely metal-free, eliminating the risk of short circuits, discharges and corrosion damage to the radiator bottom. EASY APPLICATION Thanks to its viscosity, MX-5 is easy to apply. It spreads evenly and allows for a very thin layer regardless of the application method used. VERSATILE USES Can be used on CPUs, GPUs and power semiconductor components. Thanks to its excellent properties, the ARCTIC MX-5 can be used in many scenarios without hesitation. EXCELLENT RESULTS ARCTIC MX-5 can be applied in a particularly thin layer. In combination with its high thermal conductivity, this results in very low thermal resistance.

Renowned premium-grade thermal compound for optimal heat-transfer from the CPU or GPU to the heatsink more than 150 awards and recommendations. Easy to apply no need to spread before heatsink installation and easy to clean with dry paper towel or tissue no cleaning alcohol required. Not electrically conductive and non-corroding thermal grease no risk of short-circuits and safe to use with all types of heatsinks. Trusted Noctua quality with excellent long-term stability recommended storage time up to 3 years, recommended usage time on the CPU up to 5 years. 3.5g pack for around 3-20 applications depending on CPU size, e.g. 3 applications for TR4, 15 for AM4 or LGA1700, 20 for LGA1200.