Top 8 Best Automatic Air Compressor Drain Kit

Air Compressor Tank Drain Valve. Power supply voltage AC 110V-120V50Hz. Type two-way direct-acting valve. Equipped with a ball valve filter, split with drain valve, an L-shaped structure. The current consumption Max 4mA.

Automatically drains condensation from the air compressor tank. Designed for use with all air compressors. Easy to install and maintain. Simply choose the desired cycle time - Set the drain to activate anytime between 30 seconds and 45 minutes. Discharge time Adjustable from 0.5 to 10 seconds. Maximum working pressure 230 PSI. Supply voltage 120 V. Operating temperature 40F 140F. KIT CONTENTS Electronic Auto Tank Drain with 6 ft Power Cord, Clean Out Strainer Valve, 10 Braided Stainless Steel Tank Drain Tube with 14 NPT Elbow, Three-foot Drain Hose with Hose Clamp and Universal Multi-Purpose Mounting Bracket.

Type Automatic Electronic Timed Drain Valve. Equipped with a ball valve filter, split with drain valve, an L-shaped structure.. Power supply voltage AC 110V-120V50Hz.. Design For Compressed Air. 2 Packs.. Timing There is a test button and a knob for adjusting the interval and transmission time.. Widely used Widely used in compressed air system components such as air storage tanks and drip legs..

Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Breezliy Extended Tank Drain Valve Assembly is perfect for the compressor tank.. Hex Bushing Brass Adapter 38 Male x 14 Female, for joining brass fittings or fittings with internal and external threads of different diameters.This 14 '' ball valve is made of nickel-plated brass for higher corrosion resistance than regular brass or steel .Easy to open and Close.. The extended tank drain kit offers a 14 '' elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks.. Max working pressure 175 PSI. Blasting Pressure 475 PSI. Max Temperature 200 degrees F.. Including 110 Inch Flexible Braided Steel Tube with 14 '' ball valve and 14'' elbow, 14'' NPT14'' NPT. 1 Threaded Sealing Tape, 2 Hex Bushing Brass Adapter. All Adapter with pre-applied thread sealant..

For use with 110 Volts. Timer Manual TEST switch. Valve Body- Forged brass. Air Tank connections not included. InOut Ports 14 NPT Female.

Self Cleaning, Resists clogging, Built in Strainer. 14 inlet and outlet. The new standard for solenoid drains.

Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank.. The valve kit comes with a 10 flexible braided steel drain hose which prevents breaking and kinks. 14in. NPT threads at both ends matches 14in. NPT male brass fittings. Max working pressure 175 PSI. Blasting Pressure 475 PSI. Max Temperature 200 degrees F.. This 14 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for onoff to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F.. The extended tank drain kit offers a 14 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks.. There is a Hex bushing brass adapter which is 38 Male x 14 Female for connecting two pipes or with different diameters. Has a 38 male NPT threaded on one end and a 14 female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

2901056300 Drain Valve Kit Suitable for Atlas Copco Compressor Replacement Automatic Drain 2901-0563-00. Replacement Product, Not Manufactured and Sold by Atlas Copco..

AC 110V 12 Automatic. Automatic Timed Condensate. Drain Valve. for Compressed.

Unique Mounting system Dual internal drain ports Solid state adjustable with test button With UL approved Manual Timer Pipe Size 14 NPT Female Flow HoleOrifice 316 4.7mm. Drain Rate 0.75 GPM Adjustable Drain Cycle 0.5 min. to 45 min. Discharge Time 0.5 sec. to 10 sec.. Voltage 110V, 5060 Hz Max. Pressure 230 PSI Operating Temp. Range 34 F to 140 F. Amps AC 0.2A Protection IP65 Body Material Brass Valve 2-way normally closed Connector 4-position connector Includes 6 ft. Power Cord with US Standard Plug. Note Remove protective caps to adjust timer..