Top 8 Best Bessey Cabinet Clamps

Includes two 2 BES8511 Face Frame Cabinetry Clamps. Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp. Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.. Clamp specifications works on stiles up to 1-14 in. thick 4 clamp capacity 2 jaw clamping force of 300 - 600 lbs.. Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet..

Align Cabinet Face Frames Easily. Securely Hold Stiles Flush For Drilling Securing With Fasteners. Hardened Drill Bushing Insures Perfect Drilling Of Frames For Joining Frames Together. 1 12 To 2 Stile Width Capacity Up To 1 12 Thickness.

Includes two 2 BES8511 Face Frame Cabinetry Clamps. Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp. Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.. Clamp specifications works on stiles up to 1-14 in. thick 4 clamp capacity 2 jaw clamping force of 300 - 600 lbs.. Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet..

Unique spindle within a spindle design. Outer spindle acts on the clamping jaws inner spindle applies pressure to the front edge. Two large non-slip, opposing, gentle jaws for positive grip. Large swivel pressure plate with protective plastic cap.. Lightweight, corrosion-resistant aluminum housing designed for high static stress load. Impact resistant plastic handle.

Strap Is Drawn For Both Sides Simultaneously Which Provides Evenly Distributed Clamping Pressure. Strap Coiling Mechanism Keeps Strap Neatly Contained. 4 Pivoting Corner Supports Are Included, Clamping Pressure Is Applied Evenly. Pressure Pads Pivot From 60 To 180 Degrees Making Clamping Simple Secure.

Two 2 12 KRE3512 clamps 12 of clamping capacity, a 3-34 throat depth, a 10 to 15-516 spreading capacity, and up to 1700 lbs. of clamping force. Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.. Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping.. Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.. Easily converts to spreader without tools.

One 1 pair of IBEAM48 clamps that provide 48 of clamping width.. All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications 2 throat depth 1-34 jaw width 1-38 bar width and 716 bar thickness.. Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting.. Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure.. Fixed end jaw has a 34 acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..

Perfect parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using TK-6 clamps. 3-34-Inch throat depth, with 3 removable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces-rail protector pads snap off when not needed. 1,500-pound clamping force, with ergonomic designed 2 component molded soft grip handle. Rapid action jaw opening and closing-simply raise handle away from steel rail and slide moveable jaw to desired point. Cold drawn steel alloy rail with six serrated edges for secure, slip proof clamping K Body REVO clamps sit flush on work surface for easy set ups.

One 1 pair of IBEAM72 clamps that provide 72 of clamping width.. All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications 2 throat depth 1-34 jaw width 1-38 bar width and 716 bar thickness.. Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting.. Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure.. Fixed end jaw has a 34 acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..

Malleable cast jaw clamp. Features a serrated rail with robust cast iron jaws. BESSEY anti-slip system - the set screw is molded into the sliding arm and interlocks with the serrated rail to prevent sliding. Corrugated malleable cast iron fixed jaw and sliding arm generate powerful, rigid clamping. High-quality profiled steel rail acts as a reliable reinforcement against torsional forces, while the serration on six faces additionally prevents the clamp from slipping. Hardened, smooth-running spindle with ACME thread more clamping with less cranking. Comfortable 2K composite handle.