Top 8 Best Conductive Epoxy

Creates strong permanent electrical connections. Electrical resistivity 1.8 x 10-3 cm, Thermal conductivity 1.5 WmK.. Use as a solder replacement or for bonding heat-sensitive electronic components. Cures at room temperature but heat cure is recommended to get the best possible conductivity. Excellent adhesion to many substrates such as glass, soft metals and plastics. SVHC free.

Best for Most Electronics Applications. For greater conductivity use AA-DUCT 902. Easy to use Single Use Pouch. Mix in packet and use.. Unbeatable Strength. Bonds well to glass, metals, fabrics, wood and many other substrates. Hardens at room temp in 24 hours 1 hour work time. Made in USA - Reach, RoHS and Conflict mineral compliant.

Spec. Gravity 2.79 gcc Cured, Viscosity Paste ot Life 30 min solids contents, 100. Mechanical Properties Hardness, Shore D 83 Adhesive. Shrinkage linear inin 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002. cure time 2 minutes AT 120C,5 minutes At 100C,12 hours At 25C. Mix Ratio, parts by weight 100100 ResinHardener.

Spec. Gravity 2.79 gcc Cured, Viscosity Paste ot Life 30 min solids contents, 100. Mechanical Properties Hardness, Shore D 83 Adhesive. Shrinkage linear inin 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002. cure time 2 minutes AT 120C,5 minutes At 100C,12 hours At 25C. Mix Ratio, parts by weight 1005 ResinHardener.

Thermal conductivity of 0. 8 WmK. 11 mix ratio. Working life 4 minutes, set time 15 minutes. Cure time 3 hours at room temperature or 15 minutes at 65 c 149 f. Flame retardant UL 94V-0 registered.

Excellent 0.0007 cm electrical resistivity and 2.4 WmK thermal conductivity. Easy 11 mix ratio and long working time may be mixed once and then used as a 1-part epoxy for a four hour production shift. Heat Cure is Required. Cure temperature of only 65 C for 2 hours lower than most 1-part epoxies and suitable for use on heat sensitive components.. Very long shelf life of at least two years even when stored at room temperature. Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons.

Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature. Excellent 1. 44 Wmake thermal conductivity. 1-to-1 mix ratio and 4 hours pot life. Stores and ships at slightly below room temperature no freezing or dry ice required. Very long shelf life of at least three years even when stored at room temperature. Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons.

11 mix ratio. Tensile strength of 5000 psi. Set time 8 to 10 minutes Cure time 5 hours at room temperature or 15 minutes at 65 C. Low shrinkage. Provides strong electrical insulation.

Advanced Technology Our Proprietary Graphene filler keeps the excellent performance of the silver conductive epoxy at more affordable price. Our G6E-FXSG electrically conductive adhesives stay flexible even after curing. Excellent electrical conductivity Volume resistivity 0.0005 cm. Flexible, tough and durable Our silver conductive epoxy is a perfect solution for electrical connection repair and wire glue. Easy to Use Packaging allows for easy mixing and dispensing of the conductive epoxy. Perfect for solderless electrical connections.

Thermal conductivity of 0. 8 WmK. 11 mix ratio. Working life 4 minutes, set time 15 minutes. Cure time 3 hours at room temperature or 15 minutes at 65 c 149 f. Flame retardant UL 94V-0 registered.