Top 8 Best Creality Glass Bed

Excellent adhension - Our state of the art carbon and silicone build surface provides the best adhesion in the market. It has a nice texture on surface that helps with bed adhesion. As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those prints with difficult warping issues. Will need some glue when printing ABS.. Very easy to take off the models. When the print platform cools down, you can grab a complete small model without borrowing any tools. Large models can be easily removed using tools such as a blade.No more scrathch or stab yourself with a scraper again.. Completely flat. A lot of Ender 3 owners complain about warped beds. This heated bed platform solves that problem once and for all. It's a nice upgrade to the original aluminum base of the print surface. It level things out if there is any minor warping going on there.. Very durable. The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400C. Creality 235235cm glass bed is perfect for Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro.. Upgrate design. After scan many negtive review of the old version. We have update our design. We print small logo in the bottom instead of the big CREALITY logo in the middle to avoid the printes be impinted with the CREALITY logo. After design update, the prints will have a smoother finished on the finished part..

Easy to Remove Model within 1 Minute The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.. High Viscosity and Strong Adhesion Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.. 0.15MM of Flatness Recovery Model This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.. Wear-Resistant and Scratch-Resistant, easy to clean There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.. High Hardness and Durable This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness..

Very easy to take off the models No tools needed when removing models.. Use clips to fix the glass plate on the hot bed.. Higher temperature higher sticky. The models will stick on bed firmly when temperature is high.. Fit for Ender 3 Ender 3X Ender 3 Pro Ender 5 CR-20 Pro 3D printer.. Life-time professional technical supports..

Compatibility Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer's platform firstly.. No Edge Curling The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed.. Super Convenient It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.. Excellent Flatness Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing.. High Grade Material Made of 100 Genuine Borosilicate Glass, thick and high quality. Glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Using alcohol or acetone to wipe it after repeated use..

Compatibility Our Creality authentic glass bed is applicable with Creality 3D printer Ende 3, Ender 3 Pro, Ender-3 V2, Ender 5, Ender 5 Pro, CR 20 and CR 20 Pro. Please confirm the size of your printer's platform firstly.. No Edge Curling 3D printer coated glass bed, prints can stick on the glass bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade accessory.. Excellent Flatness Upgraded 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of prints.. Super Convenient Very easy to take off the prints, no tools needed. This glass bed could be fixed with middle sized clips four clips are included in the package and cleaned with alcohol or acetone at room temperature.. No Indentation Printing Upgraded Ender 3 glass bed has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on prints surface during 3D printing..

Very easy to take off the models, NO tools to remove models. Use clips to fix the glass plate on the hot bed.. Higher temperature higher sticky. The models will stick on bed firmly when temperature is high. Fit for Ender 3 and Ender 3X 3D printer.. If you have any question or problem,please feel free to contact us.

Very easy to take off the model, no tools needed. The borosilicate glass bed could be fixed with middle sized clips.. Creality glass bed provides stronger adhesion when removing models.. This borosilicate glass bed could be fixed with middle sized clips.. The Glass Plate is applicable with Creality Creality 310 x 320 Glass Bed, 3D Printer Platform Tempered Glass Plate Build Surface for CR-10 V2 CR-10S Pro CR-10S CR-X 3D printer.. Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..

No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.. No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.. Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.. Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.. Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..

Size 470mm x 470mm x 4mm. To print with ABS or PLA and other materials, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.. Flat Polished Edge for safe to handle. Fit Creality CR-10 Max or other 3D Printers with 470mmx470mm printbed. Designed by GO-3D Print in California.

New Creality 3D printer Self Realising Glass Bed - Using a special microporous coating help release prints when the build plate cools, and there is no need to hack at it with the scrapper. Prints stick firmly to the bed without any glue or hairspray. Just heat the bed to the temp you usually print PLA, PETG, or ABS, and the print will stick.. Save time and hassle of wiping the build plate of glue, unlike normal Borosilicate Glass. The perfect 3d printers accessories for all Creality printers Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, and CR-20, CR-20 Pro, or any other printers with a bed size of 235mm by 235mm.. Super Flat for the perfect first layer - Unlike magnetic bed sheet or PEIsticker, which can be tricky when leveling and doesn't work at all temperatures. But the Self Release Glass Bed works fine with all range of temperature, compatible with PLA, PETG, and ABS.. The Self Release Glass Bed is secured to the printer using middle-size clips available at all office supply stores and unlike Magnetic Spring Steel, PEI, BuildTak, or any other build plate surfaces, this bed can last a lifetime. If it's not sticking as well as before, give it a wipe with IPA alcohol, and it will work as new.