Top 8 Best Drum Sander Paper

Dura-Gold Premium 80 Grit Gold PSA Longboard Sandpaper 20 Yard Long Continuous Roll that's 2-34 Wide. High-performance longboard sandpaper roll with a PSA pressure-sensitive adhesive backing and an easy-to-peel-off backing liner to protect the adhesive backing. The convenient continuous roll allows you to trim the sandpaper to any length you require.. Superior quality longboard sandpaper made with super coated aluminum oxide corundum that's fused with zirconia alumina. It delivers a fast, exceptionally long-lasting sharp cut with a consistent scratch pattern. It has maximum resistance to clogging and loading, increasing your productivity and reducing material consumption.. This 80 grit longboard sandpaper is ideal for use in auto body and paint shops for shaping body filler, removing paint, rough feather edging primer, and metal sanding. It's also excellent to use for woodworking, metalworking, fiberglass, plastics, or any other surface that needs sanding.. The sticky adhesive backing enables the sandpaper to be quickly and securely attached to pneumatic air file sander shoes, firm or flexible longboard file boards, hand sanding blocks, dura blocks, k-blocks, and more.. Dura-Gold offers a complete vast product line of professional, high-quality sandpaper types that provide exceptional sanding performance, so you can get the job done fast, saving you time and money.

Dura-Gold Premium Quality Long-Lasting Abrasive Cleaning Stick. Large Long Eraser Stick That'S 8 Long X 1-12 Wide X 1-12 High and Made with Professional-Grade All-Natural Rubber. It Works Excellent For Cleaning Sandpaper and Skateboard Grip Tape.. Use This Abrasive Cleaning Stick To Extend The Lifespan of All Your Sandpaper Sanding Discs, Sanding Belts, and Other Abrasives Used On Sander Tools and Equipment. To Clean Sandpaper Securely Hold The Abrasive Cleaning Stick Firmly Against The Sandpaper.. A Quick and Effective Way To Remove All The Residue That Builds-Up On Sandpaper As It'S Being Used without Damaging The Sandpaper Grit, Which Enables The Sandpaper To Last Many Times Longer For Sanding without Needing To Be Replaced.. This Abrasive Cleaning Stick Will Remove Sawdust, Pitch, Glue, Gum, Dirt, Body Filler, Primers, Paint, and All Other Built-Up Debris Residue and Particles That Get Caught In The Grit of Sandpaper. The Sandpaper Can Then Be Used Until The Grit Has Fully Worn Down.. Quickly Cleans Skateboard Gripe Tape So It Always Stays Looking Fresh Completely Removes All Dirt, Dust, and Grim Residue From Grip Tape By Firmly Rubbing The Abrasive Cleaning Stick Across The Grip Tape In Long Full Strokes..

Dura-Gold Premium 80 Grit Gold Longboard Continuous Sandpaper Roll that's 2-34 Wide, 12 Yards 36 Feet Long and has a Hook Loop Backing. The convenient continuous roll allows you to trim the sandpaper to any length you require.. Quality high-performance sandpaper that's made with super coated aluminum oxide corundum that provides a sharp cut and a uniform scratch pattern.. This 80 grit longboard sandpaper is ideal for use in auto body and paint shops for shaping body filler, removing paint, rough feather edging, and metal sanding. It's also excellent to use for woodworking, metalworking, fiberglass, plastics or any other surface that needs sanding.. Our first on the market unique hook and loop attachment design for longboard style sandpaper enables it to be used on a wider variety of tools. The sandpaper easily attaches to pneumatic air file sander shoes, firm or flexible longboard file boards, hand sanding blocks, dura blocks and more.. Dura-Gold offers a complete vast product line of professional high-quality sandpaper types that provide exceptional sanding performance, so you can get the job done fast, saving you time and money.

For use with drum sanders to save money by cutting your own strips.. Premium X-weight aluminum Oxides cuts fast and hold up to the most demanding sanding applications. Can make 4 strips for a 16 drum such as the Jet16-32. Use the strip on the machine as a template to cut the new strip. Can be used for any application where cut to size is needed.

P graded aluminum oxide refractures for longer life and excellent finish. Extra strong thin tape joint will not bump nor chatter and can be run in both directions for extended belt life. Fits most small expandable drum type machines, including the Clarke EZ8 and the KT scorpion. Ideal for sanding commercial and residential hardwood flooring and other general purpose flooring applications.

Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and other machinery that accepts 3 wide rolls. These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. MADE IN THE USA. The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep. When using 150 grits and 220 grits we recommend using those higher grits for finishing passes only.. The right amount of pressure you exert on your boards is absolutely critical. Too much and it will shorten the life of your abrasive roll, burn the material or cause problems with the motor on your machinery. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand. Take the stock out with no more drum adjustment and proceed to sanding normally.. Straight feed How about angling your stock feed through the drum instead. Angling the stock offers many advantages like less loading due to glue lines, better and more even wear and reduced motor loads. Just a slight angle provides you with more effective stock removal. Keep in mind that to achieve the best finish, the last two passes on the material should always be with the grain.. When sanding misshapen stock pieces you should always start sanding the piece with the crown side up. This helps prevent tipping or rocking when the piece is being fed through the sander. Once the down is gone, flip the stock over and sand the other side. As always, take extreme care and caution when sanding boards that are bowed, twisted or otherwise imperfect..

Save big by cutting your own drum sanding strips with our continous rolls. Just use an old strip as a template and cut to length. Our 3 wide drum sander roll fits Jet Performax 10-20 13 wrapsroll, 22-44 6 wrapsroll, 25-2 6 wrapsroll, 16-32 9 wrapsroll, Woodtek 25-2 6 wrapsroll, Ryobi WDS1600 9 wrapsroll and any drum sander that requires 3 wide strips.. Premium aluminum oxide open grain resists heat and buildup.. Tough cloth backed X wgt material provides a long lasting cut.. We are the manufacturer Factory Direct and precision cut in USA by Red Label Abrasives. Guaranteed or Money Back..

Includes six 80-grit sleeves, six 120-grit sleeves and six 240-grit sleeves. 12 in., 34 in., 1 in., 1-12 in., 2 in. and 3 in. spindle sleeve for each grit. Perfect for material removal, resurfacing and more. Designed to fit the WEN 6510 Oscillating Spindle Sander.

Save big by cutting your own drum sanding strips with our continous rolls. Just use an old strip as a template and cut to length. Our 3 wide drum sander roll fits Jet Performax 10-20 13 wrapsroll, 22-44 6 wrapsroll, 25-2 6 wrapsroll, 16-32 9 wrapsroll, Woodtek 25-2 6 wrapsroll, Ryobi WDS1600 9 wrapsroll and any drum sander that requires 3 wide strips.. Use Zirconia alumina material for drum sanding and planing of hard woods. Zirconia will outlast any standard sanding strip when used on hard woods.. Tough cloth backed Y wgt material provides a long lasting cut.. We are the manufacturer Factory Direct and precision cut in USA by Red Label Abrasives. Guaranteed or Money Back..

50-foot length and 6-inch width. 150 Grit aluminum oxide for wood sanding. Superior performance and added flexibility.

COMPATIBILITY Fits JET 16-32 Sanders.. MEDIUM ABRASIVE 120-grit, aluminum oxide sleeves.. MULTIPACK Includes four wraps..

Increase the life of your sanding belts and discs The Belt Cleaner Stick Rubber Eraser for Cleaning Sander, Shoe, Skateboard extends the life of a belt and disc as it cleans your sander without damaging the grit. Watch your sander come back to life as this cleaner stick is just like seeing pencil on paper just being wiped away with an eraser.. Simple to use Simply hold stick against a moving abrasive belt or disc to remove the loaded particles and debris.. Clean various items around the shop... The rubber construction of the stick works best on belt sanders to allow your belts to cut faster and last longer Can be used to clean a sanding belt, disc sander, drum sander, rubber bottom shoes not plastic, skateboard grip tape. Removes most all of the residue... Use stick after your sander has been clogged with wood dust andor wood resin to return the sanding surface to a like-new condition Pulls dust, wood particles, sap, metal shavings, paint, and other residue out of sanders. Includes 1 each 1-12 x 1-12 x 7-78 belt cleaning stick.

The future built on great brands. JPW is committed to providing unmatched service at every step of every business relationship. U. S. based technical service for all of our brands. Stock more than 40, 000 replacement parts. Built to serve the needs of our customers.