Top 8 Best Dust Collector Fittings

Includes 4 to 2-14 Dust Hose Reducer Adapter Fitting x 1 4'' Steel Hose Clamp x 1. Durable ABS plastic end with 2-12 OD outside diameter and 2-14 IDinside diameter is perfectly suited for standard shop vacuum hoses.. Rubber boot4 inside diameter and a hose clamp fit a 4 outside diameter power tool port.. ABS plastic port is tough and wear-resistant, which can extend the use time.. Rubber boot ensures tight fit, even variations in port size..

Includes 4 Blast Gate Both ends have 4 OD outlet diameters and are designed to work with 4 ID dust hoses or other 4 ID ports. Specifications Accepts 4 ID dust hose, port or vacuum fitting 4 Nominal end measures 3-6164 O.D. and 3-34 I.D. Compatibility Will not connect directly to other 4 OD ports please confirm that the actual listed size fits your application before ordering. If connecting to a 4 OD port, a Flex Cuff or similar device will be required. Function Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another. Quality Made with premium black ABS plastic, this unit was designed for durability and is abrasion resistant - able to withstand daily wear tear from dirt, sawdust and woodchips.

INCLUDES 1 Flexible Hose Cuff Coupler with 2 Dust Hose Clamps. FUNCTION Provides a perfectly sealed, airtight connection between a pair of 4 inch OD dust collection equipment ports, hoses or fittings. EASY TO USE These reusable flex cuffs are easily installed and can be removed without the need for assorted screws or duct tape. PREMIUM BUILD Made with a durable rubber construction to withstand long-term wear and tear, and possesses a flexible design that seamlessly conforms to slight diameter differences in fittings. DIMENSIONS O. D 4-916 and I. D 4 Connects to 4 inch nominal outer diameter adapter or dust hose. Designed to airtight connection of two fittings or hoses without using duct tapes. Rubber construction provide flexibility to bridge slight diameter differences. A pair of hose clamps included. Both ends measures 4-916-Inch O.D. and 4-564-Inch I.D.. Connect to 4-Inch O.D. adapters or hoses.

Overall size 8-Inch x 8-Inch x 4-Inch Provides airtight friction fit. Tough, durable ABS plastic material. Simple and quick to install. Provides a multitude of applications. Both 4-Inch nominal ends measure 3-6164-Inch O.D. and 3-34-Inch I.D..

Overall dimension 9-1316-Inch x 4-116-Inch x 8-14-Inch Provides airtight friction fit. Tough, durable ABS plastic material. Simple and quick to install. Provides a multitude of applications. Three 4-Inch nominal ends measure 3-6164-Inch O.D. and 3-34-Inch I.D..

INCLUDES 1 Dust collection reducer 8 3ft collection pipes 5 blast gates 4 Y-fittings, 3 45 degree elbows 2 90 degree elbows 22 pipe couplings 10 clamps additional mounting hardware. FUNCTION Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking. VISIBILITY Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages sawdust collection, chips, etc quickly at any stage within your network. COMPATIBLE Works with most shop vacs, central home vacuums, and or centralized dust extraction systems. MULTI-USE This dust collector accessories kit contains components suitable to support up to five dust collection machines.

Designed for connecting to two 4-Inch diameter hoses together. Each O.D. accepts most 4-Inch dust collection hose. A middle section with greater diameter for easy assembly. Tough, durable ABS plastic material. Both 4-Inch nominal ends measure 3-3132-Inch O.D. and 3-1116-Inch I.D..

INCLUDES 2 45-Degree Elbow Connectors, 2 Y-Fittings, 3 Dust Collector Blast Gates, and 20 4 Key Hose Clamps. APPLICATIONS An all-in-one set of dust collection fittings and attachments designed to help you create your very own 3-machine dust collection network for your work shop. EASY TO USE All components in this kit allow for a quick and easy assembly, and work well with other 4 inch ID dust collection accessories, couplers, fittings and piping options for full customization. PREMIUM Manufactured with high quality material the fittings and gates are made with ABS plastic for long-term durability, and the hose clamps are constructed using stainless steel. PRO TIP It is recommended to ground your woodworking dust collection system assembly to eliminate static electricity when employing included fittings and gates.

WOODSHOP DUST CONTROL Use the DCT 4 Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch 10.2cm plastic pipe into one longer pipe for ductwork dust collection Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment. HASSLE-FREE Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used Takes all of the work out of disconnecting and moving or switching from machine to machine Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability No special adapters for each tool required. EASY TO USE Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose can be tightened with wire hose clamp not included and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit twist for friction lock. SPECIFICATIONS Constructed from heavy-duty hard plastic 18-inch 3mm quick adaptor coupling thickness 4.5-inch 11.4cm quick adaptor coupling length 4.1-inch 10.4cm outside diameter OD 4-inch 10.2cm inside diameter ID Fits snugly on dust ports for table saw, planer, jointer, and more. CONTENTS Package includes 1 quick adapter threaded hose coupling 1-pack.

INCLUDES 4 to 2 12 Dust Collection Hose Reducer. FUNCTION A handy double sided adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2-12 shop vacuum hose branch line. The 2-12 in. opening also allows you to fit Shop-Vac, Sears and a variety of other wetdry vacuum cleaners. PLEASE NOTE This cone reducer is specifically designed to work exclusively with 4 and 2-12 hoses It is NOT intended to fit or accommodate a 2-12 OD or 4 OD dust collection equipment port directly which would require POWERTEC 70149 or 70148 Flex Cuffs. PREMIUM Made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection. DIMENSIONS 4 nominal OD end measures 3-6164 OD and 3-4164 ID 2-12 nominal OD end measures 2-1532 OD and 2-932 ID.