Top 8 Best Ender 3 Replacement Parts

Integrated Structureintegrated structure and simple circuit are convenient for disassembly, repair and assembly.. Effective Heating and Cooling Systemthere are heater block and heat sink, heater block with insulation silicone case keeps the temperature stable and makes the printing even dual-fan design makes dissipation evener, solidify model quickly and print presisely.. Optimized Design of HeatbreakOptimized design of heatbreak decreases the loss of heater block temperature by reducing heat conduction, and at the same time, it transfers its temperature to the radiator, which ensures the production stability.. Thermistor and heating tubeHigh quality thermistor and heating tube are up to 260 , with rapid-risen temperature, precise temperature control and good stability.. Note it is suitable for Ender-3 V2 3d printer, it can't work with Ender 3 3d printer..

100 original and high quality 3D Printer accessories for Creality ENDER 3. Work with different sizes of MK8 nozzle 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle. MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe built-in Teflon. CHPOWER is a TRUSTED VENDOR. Buy with confidence..

Quality Assurance100 official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3Ender-3 ProEnder-3SEnder-3 V2Ender-3 MaxCR-10CR-10S.. Work BetterOur 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLAABSWoodTPUPTEG.. Improved PerformanceThe optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.. Easy To InstallDIY kit and you need to assemble by yourself. The full necessary screws parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.. After Sales SupportMore than 20 engineers provide 247 customer service with 12-months limited and lifetime technical assistance. Please kindly contact usseller via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question..

ENDER 3 EXTRUDER is 100 ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.. 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.. ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE. MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W. TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE BUILT-IN TEFLON.

No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.. No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.. Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.. Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.. Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..

Material POM. Outer Diameter 24mm, Inner diameter 5mm, Height 11mm. Application Used for 3D Printers. If you have any problem or question,please feel free to contact us.

UPGRADE Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New Metal Anodised Aluminum Upgrade Kit.. STABLE and DURABLE Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws parts needed to directly replace your old original weak Creality plastic extruder.. EASY TO INSTALL All you do is unbolt the old original Creality plastic extruder screw in the new Metal Extruder and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.. ADVANTAGES The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.. Trusted Vendor CHPOWER is a TRUSTED VENDOR. Buy with confidence..

Fit for Creality Ender 3, Ender 3X, Ender 3 Pro. Materials Plastic. Operation Voltage DC 24V. Weight 0.078KG. Package included DC 24V Extruder Hot End Fan and DC 24V Turbo fan.

It's 100 Creality Original Upgrade Assembled Extruder Hotend.. Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.. Pluggable the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.. With more terminal housing and pins as spare parts, in case fail installation and waste.. MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..

Compatibility fit for 3D Printer 1.75mm Filament and other devices.. Blue PTFE Tubing durable PTFE material, safe and odor-free, self-lubricating, high-temperature resistance Inside diameter 2mm, outside diameter 4mm.. PC4-M6 fittings copper and plastic material, durable and sturdy Thread 6 mm, inner diameterblue end 4mm, fit for the tube whose outer diameter is 4mm.. PC4-M10 fittings stainless steel and plastic material, anti-oxidation, anti-corrosion, and high hardness Thread 10 mm, inner diameterblack end 4mm, fit for the tube whose outer diameter is 4mm.. Easy to Install the extruder fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube and self-locking..