Top 8 Best Ender 3 V2 Bed Upgrade

NOTE - The length of springs are about 25mm, which is slightly longer than the ender 3 series printersIncluding ender 3ender 3 proender 3 v2. The springs need to cut them shorter than the original ones in order to adapt them to the printer or adjust the hot bed to be higher to fit the springs.. Suitable for - Upgraded aluminum hand twist level nut are original upgraded replacement part for Ender 33 Pro3 V23 Max, Ender 55 Plus 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20.. Metal Material - Metal material is stronger, it will twist more tightly than plastic nuts.. Easy to use - The torque of these nuts is large, making it easier to fine tune the hot bed.. Quality - Made by high quality aluminum, last much longer your stock plastic nuts..

ATTENTION BEFORE USEFirstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.. ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION UNIVERSAL Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds..

235x235mm Heated Bed Upgrade for Creality Ender 3, Ender 5 and PRO models. The 24V 250W Silicone Heater reaches temperatures faster than stock PCB beds. The build plate is precisely machined from 3mm thick 6061-T6 Aluminum with - 0.2mm flatness tolerance. Integrated 3-Point Leveling support is directly compatible with our Ender 3 Y-Carriage Plate ASIN B07Q2H32SX. Includes a matching JST-XH Thermistor Connector for Creality boards.

Independent DevelopmentCompared with traditional bl touch or 3d touch, cr touch is upgraded to a metal probe with noise-reducing silicone ring. 360 transparent silicone protective shell makes CR Touch safer and more durable. Positioning accuracy 0.04mm, Automatic detection and leveling, can be reused for over 100,000 times.. Suitable for 32 Bit V4.2.2V4.2.7 MainboardThe CR Touch bed leveling kit is compatible with Creality Ender 3 v2 Ender 3 Ender 3 ProEnder 5Ender 5sEnder 5Pro and CR-10 3D Printer.. Multi-point detection Smart compensationCR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.. Easy to Install and UseThis CR touch auto leveling kit contains 3 different mounting brackets and extension cords. Please choose the suitable mounting bracket for your 3d printer, download the CR Touch firmware from Creality official website and copy it to the SD card format it before use, then directly insert it into the card slot. The firmware will be updated after powering on.. Official Genuine ProductAs one of the quality distributors, we solemnly promise that all products we sell are authentic products. During use, If you encounter any problems, feel free to contact us and we will provide assistance within 24 hours. Follow our flagship store to get the latest product information..

Upgrades the Ender 3 Pro V2 Y axis linear motion system for superior performance. Eliminates backlash and wheel binding to improve the overall print quality. Available as either a single or dual rail configuration for maximum bed stability. Steel MGN12 rails and ball bearings reduce maintenance due to low wear and tear.

Compatibility Ideal for Creality Ender 3 v233 Pro 5pro.. Excellent FlatnessCreality ender Platform Tempered Glass Plate Build Surface provides flatter and smoother build surface than magnetic mat or sticker, ensuring high flatness for the bottom of model during 3D printing. You would get a totally flat prints and your prints are coming out with that super shiny and smooth texture.. Adhesion RemovalNo Edge Curling,molds could stick on bed firmly without glue,avoiding the issue of print edges curling.when the print platform cools down,very easy to take off the models.. Upgraded Aluminum Red Hand Twist Leveling Nut The leveling nut made of high quality aluminum, stander than the original plastic nut.. High Quality Silicone Leveling Column Clips New improved leveling tool for 3D printer hot bed platform bottom connection. This heat pressure resistant silicone leveling column makes it easier to level your 3D printer.4 clips make it more stable for the 7mm thickess bed platform..

Dual Gear Extruder- Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two gear locked together. high extrusion force, ensuring smooth feeding.Manually change the e stepsmm in the Marlin firmware to 139 stepsmm.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.. Upgraded Extruder-Upgraded 1 This idler gear is upgraded with washers on both sides to prevent the extruder base from wearing out as quickly prevents it from no longer lining up with the gears on the stepper motor.Upgrade 2 This idler gear uses black half-threaded screws to prevent premature wear of the bearings inside the gear to increase the life of the extruder.. Metal Bed Leveling Nuts-Made by high quality aluminum,last much longer than plastic nuts.The torque of these nuts is large, making it easier to fine tune the hot bed.Metal nut is more powerful and will twist more tightly than plastic nuts.Hot bed Die Spring-The 3D printer spring made of spring steel is harder, more durable, has a longer service life and can be reused.4PCS 25mm springs4PCS 20mm springs Suitable for different types of 3D printers.. Teflon Tube-ID 1.9mm OD 4mmHigh QualityFor 1.75mm filament.Material PTFE,The tight tolerances make sure that the filament is lead directly to the hotend ,The smooth inner space will more effectively reduce the frictional resistance of the filament inside the tube.StatementOur product is not Capricornus tube brand,please do not misunderstand.. Compatible-Ender 3ProV2MaxEnder 55 Plus 5 ProEnder 3 NeoV2 NeoEnder 3 Max NeoCR-1010SCR-10 V2 V3CR-10 MaxCR-10 MiniCR 10S ProPro V2CR-10 PlusCR-XCR 20 3D Printer ect..

NO EDGE CURLING - Ender 3 pro glass bed with the composite coating. The models will stick on the Ender 3 v2 bed firmly without glue, avoiding the issue of the print's edges curling. The 3d printer bed is equipped with 4 clips to fix the hotbed.. LONG DURABILITY - Inorganic coating, high hardness of 8 Mohs, avoiding the deformation of the ordinary aluminum heat bed after long-term use.Undiminished performance after repeated use, no need for frequent replacement.. EXTRA GLASS CLIPS - Use clips to fix the Ender 3 pro bed on the hot bed. EASY MODEL REMOVAL - The Ender 3 build plate is designed with model removal in mind. Very easy to take off the models No tools are needed when removing models.. EASY MODEL REMOVAL - The ender 3 glass bed is designed with model removal in mind. Very easy to take off the models No tools are needed when removing models.. WIDE COMPATIBILITY - The 3d printer glass bed is fit for Creality Ender 3Ender 3 ProEnder 3 V2Ender 3SEnder 3 Neo, Ender 5Ender 5SCR-20CR-20 Pro. Perfect for 3D Printer with a printing area of 220220mm. Please confirm whether this Ender 3 pro bed mat is compatible with your 3D Printer before buying..

Compatibility Officially authorized Creality glass bed, applicable for Creality 3D printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 S1, Ender 3 Neo, Ender 3 V2 Neo, Ender-55S, CR-20, CR-20 Pro, other 3D printers with a print area of 220220mm, and most of the Cartesian style 3D printers with an MK2 MK3 hotbed. Please make sure the printing size of your printer's platform is compatible.. No Edge Curling The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be stuck on the build surface firmly without glue, avoiding the issue of the print's edges curling. Equipped with 4 clips to fix the hotbed.. Easy to Remove It is very easy to remove the prints. The surface of our tempered glass bed is a layer of the microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.. Excellent Flatness Upgraded ender 3 build plate with smaller CREALITY logo provides a flatter and smoother build surface than a magnetic mat or PEI sticker, ensuring high flatness for the bottom of mold during 3D printing.. High-Grade Material Made of 100 Genuine Borosilicate Glass, thick and high quality. The glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Using alcohol or acetone to wipe it after repeated use. We offer a 90-day free replacement, any problems, feel free to get in touch with us..