Top 8 Best Face Frame Clamps For Installing Cabinets

Includes two 2 BES8511 Face Frame Cabinetry Clamps. Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp. Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.. Clamp specifications works on stiles up to 1-14 in. thick 4 clamp capacity 2 jaw clamping force of 300 - 600 lbs.. Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet..

The Cabinet Claw Is An Unique Tool Which Combines The Multiple Steps Of Face Frame Cabinet Installation Into One Easy Process. Clamp Specifications Works On Stiles From 1-12 Inch To 2 Inch Jaw Width 2 Inch Throat Depth 1-12 Inch Minimum Opening 2-Inch, Maximum Opening Capacity 4-716 Inch. Easy Use To Install And Highly Durable. Protective Pads Protect Cabinets From Becoming Marred During Installation. Face Frame Stiles Can Be Tightened, Aligned, Pre-Drilled And Fastened While The Clamp Remains In Its Original Position. A unique tool which combines the multiple steps of face frame cabinet installation into one easy process. Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position. Professional, quality installation is achieved at a fraction of the time compared to the use of more conventional clamps.. Protective pads protect cabinets from becoming marred during installation. Installs two stiles from 1-12 inch to 2 inch width and up to 1-12 inch thickness each with 4 inch opening capacity.

PONY 8510 Cabinet ClawComplete your cabinetry projects in a fraction of the time with Pony cabinet claw. This unique and patented tool combines the various steps of face-frame cabinet installation into one easy process.. Dimensions Works on stiles from 1-12 inch to 2 inch Throat Depth 1-12 inch Minimum Opening 2 inch Maximum Opening Capacity 4-38 inch Jaw Width 2 Inch Jaw Width 2-716 inch. Max load capacity 440 lbs.. Pilot-Hole Drill There is a pilot-hole drilling guide on one end. The guide flips out of the way so you can drive screws to connect the cabinets without removing or repositioning the clamp.. Protection Pads Comes with 4 sets of protective rubber pads to cushion and protect cabinetry. Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position.. ProfessionalProfessional, quality installation is achieved at a fraction of the time compared to the use of more conventional clamps..

Align Cabinet Face Frames Easily. Securely Hold Stiles Flush For Drilling Securing With Fasteners. Hardened Drill Bushing Insures Perfect Drilling Of Frames For Joining Frames Together. 1 12 To 2 Stile Width Capacity Up To 1 12 Thickness.

Professional Specification.The cabinet clamps work on stiles from 1-12 inch to 2 inch thicknesseach with 4 opening capacity Minimum Jaw Width 2.95 Inch Maximum Jaw Width 5.3 Inch Alignment Plate Depth 1.25 to 1.5 Inch Drill bit 18 Drill hole 14. It comes with 3 felt pads for the clamp faces and alignment plate to avoid leaving marks on your cabinets.. Rust-proof Durable Steel.Made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamps body and the side jaw are cast steel for long-term durability and tightness. And its center aluminum alignment plates allow the clamps to align the two cabinets face frames together from front to back.. Accurate Efficient Drill Holes.The built-in drill guide will automatically help us lock the position to pre-drill and drill the pilot hole more accurately and effectively. Note Be sure that the drill guide is in the locked position before drilling. Cannot be used on cabinets without the lip or flush.. Easy to Use.These cabinetry clamps set is consistent, time-saving and left no damage to align the face frames of both cabinets more easier and faster. Note Please remember to stick the adhesive pads correctly to the alignment plate and secondary arms to avoid leaving marks on the faces of the cabinets.. Widely Applications.This cabinetry clamp could definitely does its job for all types of cabinets even you are not a professional installer. It holds the faces together and allows you to get them level and plumb and even has a drill guide to assist you in drilling pilot holes for your cabinet-to-cabinet fasteners..

DURABLE CABINETRY CLAMP Neitra Cabinet Clamps are designed for easy and quick installation of cabinet face frames and combine multiple steps of installing face frame cabinets into one simple process. The claw body is made of aluminum alloy CNC anodized surface, and the hardware is made of stainless steel and ultra-hardened steel. The Neitra cabinet installation tool has been patented.. UPGRADED CLAMP SPECIFICATIONS Works on 1 to 2 Stile Width Capacity, 1-916 Jaw Width, Throat Depth 1-34 Minimum Opening 2, Maximum Opening Capacity 4-716. The drilling guide hole is 3164.76mm Suitable for drill bits 38 diameter and below. and is made of super-hard steel material no wear and tear.. EASY FAST CABINET INSTALLATION Easy tightening and alignment of cabinet door frames, as well as flexible drilling guides for pre-drilling and installing screws will make assembly smooth and easy. Professional cabinet clamps allow for installation in minutes.. THOUGHTFUL DETAILS Rubber protection pads prevent the cabinet surface from being damaged during installation.. LIFETIME REPLACEMENT POLICY We have strong confidence in our products quality and performance. You deserve the best. Enjoy our lifetime replacement policy..

Cabinet Clamp Dimensions- Fit for stiles from thick 2inch and 4.38 inch width Drill bit 18, Drill hole 14, Max load capacity 440 lbs. Great Dimensions for most cabinet face frame pair. Premium Material-Cabinet claw is made of origin steel and with special E-Coating and powder coated on face. Dual coating will effectively improve corrosion resistance and rust-proof. Protective Pad- The Face Frame Pair was coated by fleece cloth protective pad, which can protect the surface of wooden furniture well. Easy to Installation-This wooden clamp can be easy to tighten and align the two frames on one face. With drill guide holes, it is easy to drill holes and screw screws at on positions. Widely Application- This cabinet clamp is also absolutely suitable for all types of cabinets. Can keep them level and vertical, even if you are not a professional installer, it will help you get the job done efficiently.

Professional Specification.The cabinet clamps work on stiles from 1-12 inch to 2 inch thicknesseach with 4 opening capacity Minimum Jaw Width 2.95 Inch Maximum Jaw Width 5.3 Inch Alignment Plate Depth 1.25 to 1.5 Inch Drill bit 18 Drill hole 14. It comes with 3 felt pads for the clamp faces and alignment plate to avoid leaving marks on your cabinets.. Rust-proof Durable Steel.Made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamps body and the side jaw are cast steel for long-term durability and tightness. And its center aluminum alignment plates allow the clamps to align the two cabinets face frames together from front to back.. Accurate Efficient Drill Holes.The built-in drill guide will automatically help us lock the position to pre-drill and drill the pilot hole more accurately and effectively. Note Be sure that the drill guide is in the locked position before drilling.. Easy to Use.These cabinetry clamps set is consistent, time-saving and left no damage to align the face frames of both cabinets more easier and faster. Note Please remember to stick the adhesive pads correctly to the alignment plate and secondary arms to avoid leaving marks on the faces of the cabinets.. Widely Applications.This cabinetry clamp could definitely does its job for all types of cabinets even you are not a professional installer. It holds the faces together and allows you to get them level and plumb and even has a drill guide to assist you in drilling pilot holes for your cabinet-to-cabinet fasteners..

INCLUDES EASY TO USE ADJUST Includes 2 Drawer Front Installation Clamps Micro-adjusting screws allow for essential fine-tuning of front panel placement. FUNCTION Drawer Front Installation Clamps Make for the easy and accurate installation of perfectly aligned front drawer panels - a pair of extra expert hands to guide you through the task quickly and accurately. VERSATILE USE Accommodates to different sizes of drawer-facestock thicknesses.. CONVENIENT FEATURES Drawer face Clamps can be in operation even when the drawer is closed. CONSISTENT RESULTS Saves time and hassle and promises uniform and flawless results - time and time again for beautiful drawer face installations.

CLAMP SPECIFICATIONS works on stiles from 1-12 To 2 thicknesseach Alignment Plate Depth 1.25 to 1.5 minimum opening 2.95 inch, maximum opening capacity 5.3 inch clamping force of 300 - 600 lbs.. PILOT HOLE DRILLING GUIDE Equipped with a drill guide, fix the drill guide for pre-drilling. once the pilot hole is drilled, The guide can be flipped, so you can connect the cabinets by driving screws without removing or repositioning the clamp.. PILOT HOLE DRILLING GUIDE Equipped with a drill guide, fix the drill guide for pre-drilling. once the pilot hole is drilled, The guide can be flipped, so you can connect the cabinets by driving screws without removing or repositioning the clamp.. EASY TO USE Keep the clamp in the original position, Face frame stiles can be tightened, aligned, pre-drilled and fastened. You can achieve a professional, quality installation in a fraction of the time.. AFTER-SALE GUARANTEE Within 1 years, any quality problems, just an email, free replacement Risk-free shopping.