Top 8 Best Fruit Tree Branch Support

INCREASE HARVEST. Stop losing your fall harvest to broken branches Holds branches up to 3 diameter.. ECO-FRIENDLY AND REUSABLE. Made of heavy-duty plastic so you can reuse it year after year, in every harvest season. Wont rust or deteriorate even with extended use in all weather conditions.. CUSTOMIZABLE. Support can be made to the precise height needed. Tree crutch can be propped up with any round pipe up to 1.5 diameter, bamboo stake, wood stakes, or T-bar. However, it is recommended to use a 2x2 lumber actual 1.5x1.5 and screwed into place for added stability.. UNIVERSAL GARDENING AND LANDSCAPE SOLUTION. For use with all varieties of trees citrus, pine, seedlings, etc., and in orchards, vineyards, and ornamental gardens to support a wide range of shrubs, vines, and other trellis-loving plants.. SUPPORT SYSTEM. Anchor branch to the Kalinar bracket to support, brace, hold, or shape tree branches as desired. Branch can be tied to the support using any thin rope, twine or elastic band using the built-in notches. Use the tree crutch to aid in straightening crooked branches or to create unique designs, spacing the branches to maximize fruit production or grafting in multiple varieties.. Size 2-Pack. Tree supports for propping up heavily fruited tree branches in order to prevent them from breaking..

Sufficient Quantity the package includes 100 pieces of black tree limb spreaders for fruit trees Note that it is more suitable for potted plants, small fruit trees or potted plants They measure approx. 3.54 x 1.57 inches 9 x 4 cm, sufficient quantity allow you to use for more trees and replace for a long time, you can also use a few more on each branch for better effect. Sturdy and Reliable these tree spreaders are made of strong and sturdy plastic, reliable, and reusable, and have good load bearing capacity, they will not easy to break or deform, you can use them for strong branches or growing branches with confidence. Easy to Use fruit tree branch spreader is easy and convenient to use without tedious installation steps, adjust the tree spreaders for a good angle, then fix the wider end to the tree trunk and attach the thinner end to the tree branches that have a need for support. Widely Applicable the fruit tree branch support is suitable for most kinds of trees, you can apply them for shaping growing branches of peach trees, pear trees, citrus trees, other fruit trees, changing the shape of the trees, promoting nutrient delivery and improving their flowering rate. Practical Features black fruit tree branch limb spreader help young branches grow from the central stem, forming a wide branching angle and making the tree more beautiful These tree supports allows better airflow and can help dispense the damp of the branches, which allows them to grow more luxuriant and increase fruit yield.

What You Will Receive you will receive 6 pieces of silver tree supports for young trees available in 2 kinds of Y shape supports, sufficient quantity is enough to satisfy your daily use and replacement needs. Size Information the size of tree straightening kit is about 10 x 6 cm 4 x 2.4 inches, the suitable size is convenient to take with you on the go, without taking up too much space. Sturdy Material tree supports are made of metal material, sturdy and solid, firm and strong, resistant to corrosion or rust, not easy to break, deform or bend, can retain its color and shape after long time use. Different Using Methods our tree branches have 2 Y shaped supports, so they can support branches of different diameters, you can choose the correct method depending on the diameter of the branch. Widely Applied tree supports for leaning tree can be applied in vineyards, ornamental gardens and orchards to support a wide range of plants, fruits and vegetables, providing them with strong support and ensuring that the plants thrive.

Package Includes12 Pieces of tree supports 3.86 x 1.89 inches Two long hemp ropes33 feetpc Sufficient quantity is enough to satisfy your daily use and replacement needs.. Widely ApplicationMetal tree supports for leaning tree can be applied in vineyards, ornamental gardens and orchards to support a wide range of plants, fruits and vegetables, providing them with strong support and ensuring that the plants thrive.. Unique DesignOur tree branch has two types of Y-shaped support, so it can support tree branches of different diameters. The method can be selected according to the diameter of the branch.. Sturdy MaterialMade of high-quality metal, sturdy and not easy to break. Our tree support can be used for a long time no matter under the sun or rain outdoors.. Customer ServiceIf you have any questions, please feel free to contact us. We will reply to you within 24 hours..

Rich in Quantity you will receive 4 pieces of fruit tree branch support in grey color, enough quantity to meet your needs and replacements, and you can also share some with your family members. Size Information the tree brace measures approx. 7 x 5.1 inches, which can hold branches 3 inches to 5.4 inches, fits on standard 1.57 x 1.57 inches lumber, wood stakes, bamboo stakes, broom pole and so on. Easy to Use the branch crutch is designed into U shape, easy and convenient for you to use, you can use a thin rope or elastic band to tie to the support, so it can support branches of different diameters, bringing much convenience to you. Reliable Material the tree support kit is made of quality plastic material, reliable and reusable, sturdy and strong, not easy to break or fade, which can serve you for a long time and you can use it with confidence. Widely Applicable these branch crutches are practical and classic tools, which can be applied in vineyards, ornamental gardens and orchards to support a wide range of plants, fruits and vegetables, providing them with strong support and ensuring that the plants thrive.

Value Sets6 Pcs metal tree supports for propping up heavily branches from breaking. About 4 inches x 2.4 inches, 0.75-inch diameter ,Yshape. Easy to use, convenient and enough quantity to meet your daily use. Please make sure the diameter carefully before ordering,they can good for round pipe, bamboo, wood stakes to prop up the supports.. MaterialMade of high-quality metal-Sturdy, strong, rustproof and not easy to break. Our tree support can be used for a long time no matter under the sun or rain outdoors.. New DesignThe Y-shaped Design can support different diameters branches. You just need to choose the right method without buy different support.The small barbs can help the branches hold better.. ApplicationThey are good for vineyards, ornamental gardens, orchards,fruits and vegetables, providing them with strong support and help the plants thrive.. Commitment100 Brand New. Contact us if you are not satisfied with it. Well process full refund or send you a replacement without returning or any additional conditions..

FCENDS branch support tools have a Y-shaped design, they provide strong support without hurting the bark, better protect your fruit, and your branches won't break easily.. Our tree support kits are made of high-quality metal materials, which are strong and durable, not easy to break, will not fade, and can last for a long time. Whether you're growing lush apple trees, fruit-bearing pear trees, or sprawling vines, installing these tree supports can save your plants before they lose more branches.. Our Rescue Branch Kit includes 2 Pcs metal tree supports for propping up heavy fruited branches from breaking, stakes required for installation are not included. Please confirm the product size before ordering to avoid inconvenience.. Our branch crutches have two different sizes of Y-shaped supports. Therefore, it can support branches of different diameters.. FCENDS branch crutches are good for vineyards, ornamental gardens, orchards, fruit, and vegetables, and they can also be used to support trees against extreme weather..

What Can You Receive - You will receive 8 pcs silver metal tree support device in a gift box, rich quantity is enough to satisfy your daily use and replacement needs.. Size Information - The size of tree straightening kit is about 9.5 x 6 cm 3.74 x 2.36 inch, big Y is about 6 x 5.3 cm2.36 x 2.09 inch, small Y is about 1.5 x 1.4 cm0.59 x 0.55 inch.. Sturdy and Reusable - Our plant support are made of high-quality metal, sturdy and not easy to break, even exposed to the sun and rain outdoors, can be used for a long time, harder than plastic and more widely used. When the harvest season is over, you can collect them and use them in the next season.. Two Ways to Use It - Our branch crutch has two types of Y-shaped support, so it can support tree branches of different diameters. You can choose the right method based on the diameter of the tree branch.. Widely Applied Our trellis supports can be used in vineyards, ornamental gardens and orchards to support a wide range of plants, fruits and vegetables, providing them with strong support and ensuring that the plants thrive..

What you get You will receive 4pcs branch shaped plant support with 30pcs ties in one package,for you can help your plant grow upright and healthy.. MaterialOur plant stakes made from quality plastic,they will resist UV,not easy to fade or rust,durable and reliable to use for long time.. Size DetailsPer plant stakes consist of 3pcs combination,and each seaction measures about 12.0inch and 15.8inch ,for a total length of 27inch70cm after combined.. DesignThese branch stakes designed in original shape of branches in green color,so they can blend well to most houseplant,flower arrangement,will not easy to be noticed.. Wide UsageThese branch stakes can be perfect plant supports for indoor outdoor plants,will make your plant stand tall and upright,providing a good growing condition for your plants..

Product Information 1 roll trees tie strap in package,width is 1inches with 108 feet length,enough length for your daily use.. Supporting Plant this strap work well to support the trees in bad weather, keeping them upright, secure position. If you use ordinary ropes, they usually slip, stretch or cut into the bark. But there is no problem with this product,the strap is non-slip and does not hurt trees.. High Quality Materialthe strap is made of high-strength polyester material,the breaking force of the belt is high enough to not easily break, and the webbing is flexible so that it can easy to fix and prevent damage to plants. Even if it is used outdoors, the tree tie has strong toughness and durability, and can be used for a long time.. Widely Applicationsperfect straps for hold large trees, but flexible enough to be used for young saplings and shrubs.At the same time, it can not only be used as a tree tie, but also can be used for fixed cargo, towed cargo, camping, fixed tent, cable rope and so on.. Warm Tipsthe actual color of the product may be different from the picture shown on website due to the personal screen of display or reflecting light when shooting pictures..