Top 8 Best Hotend 3d Printer

It's 100 Creality Original and Creality-Capricorn PTFE Tubing.. Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.. Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.. High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.. Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality..

All Metal Hotend - 300 PrintingSpider Hotend is made of an aluminum cooling block and sink, a TITANIUM heat break, an aluminum heat break and a brass plated wear resistant M6 nozzle. All-metal design for better overrall performance. Supporting 300 high-temperature printing and compatible with various filaments such as PLA, ABS, PETG, TPU, PP, PC, Nylon, Peek, PEI, etc.. Stronger Structure - Longer LifespanThe heat block and heat sink are fixed in a tight fit to ensure that the heat break is not stressed and the strength is upgraded to extend the life of the hotend.. Compact Easy to InstallThis hotend weights only 45g. Small and exquisite extrenal size with modular standard interface design. Three steps to install it Remove the original hotend, re-attach the thermistor and heat tube on spider hotend and lock the nozzle with M320 screws. Installation finished.. Drop in All Metal Conversion Kit for Ender PrintersIt fits almost all Ender 3d printers. Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 Max, Ender 3s, CR-10, CR-10S, CR-10 S5, CR-10 S4, CR-10Mini, Ender-5, Ender-5 Pro, Ender-5 Plus, Ender-6, Ender-4, Ender2 Pro, Ender-2, CR-20, CR-20 Pro.. Package List WarrantyKit Includes Thermistor, aluminum cooling block, Titanium heat break, aluminum heater block, brass plated wear resistant M6 nozzle, silicone sock, wrenches, copper tube and thermal gtrease. During use, if you have any question, please contact us and we weill reply you within 24 hours..

Fits Creality CR-10 CR-10S CR-10-S5 CR-10 MINI CR-10-S4 Ender 2 Ender 3 Ender 3 Pro Ender 5 TronXY X5S. Nozzle size 0.4mm. Kit Includes Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock. This is a Drop in All Metal Conversion Kit for Creality printers. Made in USA by Micro Swiss.

Compatibility 100 Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3 Ender 3 V2 Ender 3 Pro Ender 3S.. Pluggable the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.. MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe built-in teflon.. Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle 0.2mm0.3mm0.4mm0.5mm 0.6mm0.8mm1.0mm.. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency..

100 Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100 Creality Original. The silver ones work for the same functions as the golden ones.. Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.. Pluggable the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.. With more terminal housing and pins as spare parts, in case fail installation and waste .. MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..

Support 400mms High Speed Printing Compare with sprider 3.0, the overall melting zone is increased by 15, the length is increased by 5, which offer a smooth printing experience even with 0.8mm Nozzle. Whats more, the unique ceramic material design heating ring improves the heating efficiency, it only takes 40s to heat to 200 , supports 400mms high speed printing.. 100 Creality Official Spider Ceramic Hotend Kit is All Metal design which can reach 300 to accomplish better effect of printing with high temperature filaments. It is compatible with PLA, ABS, PETG, TPU, PP, PC, PEEK, PEI, Nylon and more filament.. Simple Installation, No Modification RequiredWith modular standard interface design and universal standard nozzle, this Spider Ceramic Hotend is a drop-in All Metal Hot end Conversion Kit. As a direct replacement for the stock hardware , installation requires no additional parts or modifications to use.. Wide Compatibility DelicateCompatible with Creality Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, Ender 5 Pro, Ender 5 Plus, CR 10 series and CR-20 series 3D Printer.. Creality 3D Official StoreThere are more than 20 engineers for after-sales service and provide 247 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a questiondirectly to get the professional assistance..

Fast Heat Dissipation - No need of bowden tube, filaments directly pass through the smooth inner wall of aluminum heatsink, which allows for faster heat dissipation.. Efficient Heat-blocking - Heat break is made of Titanium Alloy, providing much better thermal isolation than normal stainless steel printer throat.. High Precision - Due to quality-first production process, the heatsink, heater block and nozzle could offer smooth inner wall and precise connection.. No blockage - Because of the advanced heatsink and heat break, the probability of the filament blocking the hotend is greatly reduced.. Applicable Model - Creality CR-10, CR-10S, CR-10 S4, CR-10 Mini, CR-10 S5, CR-20, CR-20 Pro, Ender-2, Ender-3, Ender-3 Pro, Ender-5, TronXY X5S, Tevo Tornado.

High Thermal Conductivity Uniform Heating - The cylindrical ceramic heating ring improves heating efficiency and reduces heat loss. Uniform heating and fast heat transfer, it only takes 40 seconds to heat from room temperature to 200C. Available up to 300 high temperature printing.. Support 400mms High-speed Printing - The overall hot melt section is increased by 30 The hot melt section length is 27.8mm, and the high-temperature heat-resistant insulation sheet is added to maintain the temperature of the melting section, supporting 400mms high-speed printing.. High-Temperature Resistance Up To 300C - The heat break is made of titanium and copper alloys which support high temperature printing at 300C and is compatible with more filaments. Also, the 0.2mm thin wall thickness for excellent thermal insulation. Compatible filaments PLA, ABS, PETG, TPU, PP, PC, Nylon,PEEK,PEI, etc.. Strength Upgrade Longer lifespan - The heat break and heat sink are perfectly fit through the titanium alloy base to avoid pressure between them, and the strength is upgraded to extend the life of the hotend.. Wide CompatibilityCreality Upgrade Spider Speedy Ceramic Hotend Kit compatible with Ender-3 ProEnder-3Ender-3 V2Ender-5Ender-5 ProEnder-5 Plus Ender-3sEnder-6Ender-4Ender-3 MaxEnder-2 ProEnder-2CR-10S CR-10CR-10 S5CR-10 S4CR-10MiniCR-20CR-20 Pro..

This assembled replacement stock hotend from Creality is a plug and play replacement or spare unit for all Creality brand printers except the Ender 3 CV2 Neo including Ender series as well as the CR series printers. See product description for more info on CR series. Also included are some extra brass nozzles, a hotend sock and upgraded Capricorn PTFE tubing which drastically improves the performance of this part over its standard PTFE option.. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Capricorn PTFE is also manufactured to the highest specifications for 1.75mm filament to ensure that there is no space in the tube once the filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend. Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chinese manufacturers.. 2 complimentary hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency.. F1rst Layer is proud to provide 247 customer support and we strive to achieve 100 customer satisfaction. If you have any questions or concerns about this product, please do not hesitate to contact us directly and we will assist with any and all questions..

MaterialAluminum Stainless Steel Brass. AdvantageThe aluminum cooling block has better heat dissipation and is not easy to plug. Widely UsedUsed for Creality CR-10 CR-10S Ender 3 Ender 3 Pro Ender 3 V2 Ender 5 and other 3D printer. NozzleNozzle size 0.4mm. Package IncludePC4-M10 Pneumatic Fitting, Aluminum Cooling Block, Metal Throat Heat Break, Aluminum Heater Block, Brass 0.4mm Nozzle, Silicone Sock.