Top 8 Best Irrigation Hole Punch

Sturdy and Durable - Made of high quality plastic, this punch is durable, stable and rust. And the puncher has been polished so it will not become dull and can be used for a long time.. Size - Suitable for PE pipes with a diameter of 162025mm, punches holes measuring 3 mm 0.118 Inches, proper size can make sure that sprinklers can snug fit on the tubing for minimizing waste.. 2-In-1 Punch and Fitting Insert - Our irrigation tool kit is suitable for both drip tubing punch and 1 4 fitting insertion use,ergonomic design, easy to operate.. How to use - Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole. Package - You will receive1 professional punch tool, 1 2 in 1 punch and accessory inserts. Good tools for gardening and irrigation,sufficient quantity for your daily using..

Easy to grip the handle is made of durable plastic and non-corrosive material. Tight fit The punching size is 0.118 inches, which can be closely fitted to eliminate waste and maintain proper pressure in the drip system. Uses Two-in-one dropper punch and 14 fitting insertion tool, used for piercing and perforating when installing the dropper and micro sprinkler in the polyethylene tube. Function Pierce holes of suitable size to connect accessories and connectors. Customer Service If you have any questions about our products, please contact with us, we provide mail response service and perfect after-sales service..

Spring-loaded 2-in-1 combination tool. Cuts all sizes of Drip tubing and also punches holes for drippers and 14 fittings. Hardened steel punch and surgical steel blade. Pierces a clean hole and provides a clean, square cut with no jagged edges or crushed tubing. Superior ergonomic grip. Highly visible purple color allows tool to be easily seen in grass, soil, bark, mulch etc.

Punch holes in supply tubing for easier insertion of in. barbed fittings and emitters with in. barbed inserts Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper. The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts Holds in., 58 in., and 0.710 in. supply tubing to punch holes to fit in. barbed fittings and emitters with in. barbed inserts. Use with in., 58 in., or 0.710 in. Supply Tubing to punch holes. Hand-held tool is designed with a comfortable pistol grip for strain-free use Metal hole punch tip penetrates tubing wall when handgrip is pressed Sliding shelf on tubing rest slides out to accommodate larger sized tubing. Comes with one Pistol Grip Hole Punch Tool.

2-In-1 Punch and Fitting Insert The drip irrigation hole punch tool is designed to fit for drip tubing punch and 14 fitting insertion use Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced The hole size is 4 mm 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting.. Quality Material Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time.. Application This 2-in-one drip irrigation tubing hole punch fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing.. Easy to Use Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole.. Humanized Design The smartly designed fitting insertion tool will make you feel untired even after using it for a long time It can help you drill easily and fast and save time and energy for you The combination of blue and black color makes the drip irrigation punch beautiful and delicate.

The package includes 1 drip irrigation pipe punching machine and 50 drip irrigation plugs, a reasonable package for your daily use. Appropriate size The punch size is 3 mm 0.118 inch, which can fit tightly to eliminate waste and maintain proper pressure in the drip system. Both ends of the irrigation plug are of different sizes. One end is suitable for standard holes of 3 mm-6 mm, or one end of any 14 inch feeder is covered, and the other end is suitable for worn transmitters of 7 mm or about 14 inch Hole this multifunctional stopper is suitable for filling into 12 inch drip irrigation pipe. Practical and durable the punching tools are made of quality plastic and metal, practical and durable, not easy to rust and damage the plastic part of the punch allows you to hold it comfortably, and the punch has been polished, so it will not change It is blunt and can serve you for a long time the drip irrigation pipe plug is made of quality plastic, which is not easy to break or deform, sturdy and durable, waterproof, and can be applied outdoors in sunlight or rainy weather.. Scope of application Irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles suitable for PE pipes with diameters of 16 mm and 20 mm the puncher is of suitable size, light weight, and easy to carry And storage, it does not take up space. Easy to use The sturdy hole punch tool is simple and easy to use, just insert the pipe and gently squeeze the hole punch until it is pierced for anyone with a miniature or drip irrigation garden watering system, drip Irrigation tubing hole punch tool and drip irrigation plugs are essential tool kits.

What you get 2 pieces exquisite drip irrigation tubing hole punch tools for 14 inch irrigation tubes. Good tools for gardening and irrigation, sufficient quantity for your daily using.. Practical and durable The irrigation punch tools are made of high-quality plastic and metal, which is durable, stable and does not rust. Moreover, the hole punch is polished, so it will not become dull and can be used for a long time.. Size Suitable for PE pipes with a diameter of 1620mm, punches holes measuring 3 mm 0.118 Inches, proper size can make sure that sprinklers can snug fit on the tubing for minimizing waste.. Humanized design The fitting insertion tool is light in weight, convenient to carry and store, and does not take up space. It can help you drill holes easily, saving time and energy.. Easy to use In order to present better efficiency, you can use hair dryer to soften slightly the position of pipe where your want to punch. Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced..

Practical and durable 2 punch tools are made of quality plastic and metal, practical and durable, not easy to rust and damage The plastic part of the hole punch allows you to hold it comfortably, and the punch is polished so that it will not become dull and can serve you for a long time. Hunmanized design the smartly designed hole punch will make you feel relaxed even after using it for a long time It can help you drill easily and save time and energy The combination of blue and black makes the puncher beautiful and delicate. Easy to use the fitting insertion tool is designed to be easy for you to use Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced The hole size is 3 mm 0.118 inch to ensure the insertion of the connector, fitting and emitter, making the installation more closely fitting. Widely applicable the irrigation tubing hole punch can make a hole in the polyethylene tube for installing drippers and micro nozzles Suitable for PE pipes with diameters of 16 mm and 20 mm The hole punch is of proper size, light in weight, convenient to carry and store, and does not take up space. What you will get the package includes 2 exquisite and beautiful drip irrigation tubing hole punch tools, the quantity meets most of your needs, this is a good tool for gardening and irrigation.

Use to punches holes in 12-inch tubing for installing 14-inch fittings and drippers. For above or below ground installation. Compatible with standard 12-inch drip tubing. Durable construction provides years of reliable use. For outdoor use with cold water only.

Package content you will get 4 pieces drip irrigation hole punch tools, practical fittings for your drip irrigation operation, enough quantities for you to use in garden. Reliable material the end are made of stable plastic, which possesses sturdy and water resistant characteristic, durable and reliable to assure a long life using time. Usage they can be applied for drip irrigation to punch tubing holes, help the drippers or nozzles after inserting at the ends of the water pipe, serve as ideal accessories for watering plants. Function each tool is about 2 x 0.75 inch 5 x 1.9 cm LW, and 0.157 inch 4 mm in punching diameter, create holes in 14 inch drip irrigation pipes, ensures properly sized holes to help reduce blowout of watering devices, and reducing fatigue when setting up the drip system. Attention our drip hole punch tool is suitable for anyone wants the small hole in their drip tubing, please make sure the size information before you purches our products.