Top 8 Best Irrigation Pressure Regulator

SAFE USE- Made of lead free brass, the lead content of the regulator is less than 13, which is far below the lead-free requirement of NSF. That means you could have safe and healthy life.. COMPATIBLE- Water pressure regulator ends 34 threads. It compatible with all American water sources for convenient use.. ADJUSTABLE- It can be raised from 0-160 psi. You can protect your pipeline system through our regulator. Adjust the screw at the top of the regulator to select your desired pressure settings.. EFFECTIVE RV WATER PRESSURE REGULATOR - The water pressure can be clearly seen with a gauge. Must have for RV, camper, travel trailer.. Note- The leakage may be caused by the faulty washer or missing washer. The bubble in the gauge is normal condition, which may be caused by the temperature change or shaking when fixing..

Moistenland 25 PSI preset pressure regulators hose thread are used to reduce and regulate the incoming pressure of a households water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI.. High-strength ABS construction for durability, available with 34 female hose thread to fit all standard hose or pipe thread connections. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. It may be connected to an automated timer, backflow preventer, or filter, if desired.. This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 34 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA..

Maintains optimum 25 psi pressure and water flow to Drip lines and emitter devices. Connects to any 34 male pipe threaded faucet, garden hose or component. 20 gallon per minute flow through capacity. Durable, robust design provides reliable operation. Constructed of highly durable UV and chemical-resistant materials. For automated watering add a reliable Rain Bird professional-grade hose end timer Amazon ASIN B006JZ514U sold separately.

Maintains water pressure between 20-30 psi 25 psi nominal. 0-6.8 GPM gallons per minute flowrate. Maximum Inlet Pressure 145 psi.. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. Connects to a standard hose bib or garden hose in USA and Canada.. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25 lead.. Upgrade your plastic pressure regulator to this durable, heavy duty lead-free brass pressure regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.. Note Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..

34 Y filter unit combines filtration and 30 psi pressure regulation in one piece. Reduces the number of components in system and speeds installation. Protects and prevents clogging of downstream Drip irrigation components. 200 mesh 75 micron Stainless-steel filter pre-installed cap unthreads for quick cleaning. Works with all types and brands of 34 irrigation valves. Robust body and cap constructed of glass-filled polypropylene for reliable long-life. 34 x 34 male pipe thread 150 psi pressure rating.

Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation. This PRLG Pressure Regulator Landscape Grade maintains a constant outlet pressure of 25 PSI 1.72 bar with a flow range between 0.5 - 7 GPM 114 - 1590 Lhr.. 100 water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.. Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 34 outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.. Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.. Important note This irrigation pressure regulator regulates dynamic water pressure the pressure while water is flowing. If measuring this regulator with a pressure gauge, do not screw the gauge directly onto the end of the regulator. This blocks the flow of water and measures static pressure, not dynamic pressure. To measure dynamic water pressure, attach a gauge at the end of your irrigation tubing line, or use an inline gauge that allows water to flow unblocked through the regulator..

Maintains water pressure between 20-30 psi 25 psi nominal. 0-6.5 GPM gallons per minute flowrate. Maximum Inlet Pressure 150 psi. Note As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut.. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. Connects to a standard hose bib or garden hose in USA and Canada.. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25 lead.. Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.. Note Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..

Note gasket failure or missing gasket may cause leakage. Temperature changes or shaking may cause bubbles in the pressure gauge, which is normal.. Material Made of lead free brass, the lead content is less than 0.13, far lower than the lead-free standard required by NSF. It can be raised from 0 to 160 psi. You can easily select the required pressure to protect the piping system by adjusting the screw on the top of the regulator. 34 inch threaded joint is compatible with all American water hose.. The water pressure can be clearly seen with a pressure gauge, which is necessary for RVs, campers and travel trailers..

Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system Connects to pipe commonly used in underground valve systems. Attach the pressure-regulating filter to pipe with a in. MPT connection point Use with a in. FPT Swivel Adapter to connect supply tubing. Attach the pressure-regulating filter to pipe with a in. MPT connection point Periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water the filter can also be removed from the middle housing and pulled out to clean. Regulates water pressure from water source preset at 30 PSI, ideal for most drip irrigation systems 200-mesh filter washer blocks particles in the water from clogging emitters filter is removable for cleaning and maintenance Filter can be flushed out by removing the flush cap or cleanout cap and running water through also can be removed from the middle housing to clean. Comes with one in. MPT X in. MPT Pressure-Regulating. Y Filter.

Maintains water pressure between 20-30 psi 25 psi nominal. 0-7 GPM gallons per minute flowrate. Maximum Inlet Pressure 140 psi. Note As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut.. Inlet Size FHT female hose thread. Outlet Size MHT male hose thread. Connects to a standard hose bib or garden hose in USA and Canada.. It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25 lead.. Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator. Its all metal lead-free brass exterior is impervious to sunlight.. Note Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time..

Regulates water pressure from water source preset at 30 PSI, ideal for most drip irrigation systems Maintains 30 PSI. Attach to a in. MHT outdoor faucet, hose bibb, or spigot Use with a in. FHT Swivel Adapter to connect supply tubing. Lowers incoming water pressure from a water source for optimal performance of your drip system Connect to an in. MHT outdoor faucet or hose bibb. Attach the pressure regulator to outdoor faucet, hose bibb, or spigot with in. MPT connection point Periodically check for damage and replace as needed.