Top 8 Best Light Bar Bracket

For 52 curved light bar. Please measure your light bar. Easy 3-step install with self-tap screw see picture. 60 less drill damage vs rivet nut insert. Installation issues Contact us directly not Amazon and our engineer will respond within 8 hrs.. Not Compatible with 2007 Classic model pickups. Compatible with Chevrolet 07-13 Avalanche, 07-13 Silverado 1500, 07-14 Silverado 2500 HD, 07-14 Silverado 3500 HD, 07-14 Suburban 1500, 07-14 Suburban 2500, 07-14 Tahoe GMC 07-13 Sierra 1500, 07-14 Sierra 2500 HD, 07-14 Sierra 3500 HD, 07-14 Yukon, 07-14 Yukon XL 1500, 07-14 Yukon XL 2500.

Designed for 52 Curved light bar. Can also fit 50 curved light bar by mounting further back from the front windshield. Compatible With 2nd 3rd Generation Toyota Tacoma 2005-2020. Kit includes 2x Mounting Brackets, 2x Gaskets, Mounting Hardware, Instruction Manual. Note Provided rivets are intentionally larger than the pre-drilled holes on the brackets. During installation, drill through the brackets and vehicle frame together with 316 drill bit, and then fasten with the provided rivets. Windnoise is an universal problem for all light bars due to their cooling finblades. Simple solution are widely available online to reduce or eliminate this noise.

DIMENSION 3.66 1.7 1.28 inch.DO NOT COME WITH LED LIGHTS. MATERIAL Heavy duty Die-cast aluminum. With anti-vibration rubber gaskets to avoid damage to your car paint, and raise the light bar height avoid scratching during driving.. APPLICATION Can perfect apply to most side mounted LED Light Bar in the market.. ADJUSTABLE Angle-Adjustable side mounting brackets allow to achieve optimal angle you need.. PACKAGE Including 2 Side Mounting Brackets 2 Rubber Pads For a Steady Installation Necessary Mounting Hardwares Bump protection ring, 8mm Screw set for a strong supporting..

Heavy-duty bracket High-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion. Mounting position 4 different locationsmethods to install the off-road lights. On the bull bar, 2 Sets of mounting holes on top and 1 set in front. Note There is a possibility that the bracket holder may block some vehicles' parking sensor. In some cases, you may be able to drill additional holes on the bracket to securely mount the bracket. Easy installation No drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes. Universal fitment Fits for almost all car, Jeep, truck, Pickup, SUV, 4x4, etc. Work with most off road auxiliary lights, fog lights, driving lights, LED work Lamp and LED light bars. Package include 1Pc front license plate mounting bracket.

2-pack set of universal fit side mounting brackets come with screws, nuts, accessories to install these brackets. Compatible with most Single-Row LED light bars on the market Good for both straight or curved LED light bar up to 51.5 250W. 360-degree rotation, allows you to adjust the angle freely. Good for most LED light bar brands such as iJDMTOY Off-Road, Rough Country, Rigid Industries, Auxbeam, Nilight, etc.

Quality Material Upgrade Finishes Made of heavy duty metal with wrinkle finishes. Can withstand heavy beat but still remain beautiful outlook. Very durable and unique. Simple Installation Identify left and right mounting brackets as pictures show, prepare a cardboard, and then follow the 4 steps in picture 5 to install. Make sure in step 4 that bracket need to be installed at where windshield ends.. Extra Protection Come with foam tape that you can use at the contact area between bracket and vehicle to protect vehicle from wear and ensure a more secure installation.. Fitment Type For 52 curved light bar mount, compatible with vehicles such as 99-06 Silverado 15001500HD, 07 Silverado Classic, 99-04 Silverado 2500, 01-06 Silverado 2500HD3500, 00-06 Tahoe, 00-06 Suburban 15002500. GMC 99-06 Sierra 15001500 HD, 07 Sierra 1500 Classic, 99-04 Sierra 2500, 01-06 Sierra 2500HD3500, 00-06 Yukon, 00-06 Yukon XL 15002500.. Package Include 2PCS mounting bracket 1 pack of self-tapping screws plus foam tape. fit type Vehicle Specific.

UPGRATED OFFROAD LIGHTS DWVO 52 Inch 300W Combo 2X 18W Spot LED Work Light Mounting BracketsWiring Harness for JEEP JK Wrangler. Imported high quality LED chips, Innovative 9D optic designfisheye lens.. COMBO LIGHT BAR - Subversive spot flood optic system,high density light spread makes dark night become daytime. Ultimate light pattern for Offroad Adventure- throw the light to extreme distance through the dark,also spread light on lane to see the road condition clearly.. LONG LIFE - External heat sink fins-dual cooling area,faster heat dissipation Full Aluminum housing for extra durability while doubling as heat sink IP68 rated waterproof dustproof, durable enough to withstand any harsh environments.. HIGH PERFORMANCE IP68 waterproof rate, no fear of bad weather such as rain, fog, weather, and so on, so that you can travel safely. Aluminum alloy housing, efficient cooling, heat dissipation, service life of more than 50000 hours.. SIDE MOUNTING BRACKETWIDE APPLICATION A sturdy bracket can firmly fix the light bar shockproof and fracture prevention through rough terrain .. The work light can be compatible with almost all Jeeps, 4x4, Trucks, Motorcycles, SUVs, ATVs, Cars, Boats, Back-up Light, Off Road Lighting, and so on..

Fitment Type Specially designed for JK 2007-2017 for easier light mounting. Upper windshield is to install 52 light bar, while the lower windshield is to install bottom-mounted small led pod lights, remains ample to adjust.. Upgrading reflector cup the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination. SIDE MOUNTING BRACKET The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain. High performance IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan. Simple Installation Just peel the foam tap, stick them to the bracket, mount the bracket to the windshield frame with vehicles original factory bolts, and then use the mounting hardware comes with the light bar, to install the light bar on the bracket. Note If mounting hardware size from the light bar are not same as mounting holes size on bracket, you can use washers to make them fit.

MATERIAL Aluminum alloy. Durable mounting brackets were waterproof dustproof shockproof.. EASY to INSTALLThe max adjustable agle of the mounting bracket was 45 degree. Also can be free slide in the back of LED light. Allow you to change the directon of light beam, lighting every corner.. WIDE APPLICATIONS Fit for 4 inch to 54 inch LED pods and LED light bars, suitable for most kinds of Car, Truck, Off Road. 4WD, SUV, ATV, UTV, Farming, Tractor and so on.. EASY to INSTALL Mounting the brackets on your LED light and tighten anti-loose screws, need not worry about fall down shaking.. BUY with CONFIDENCE If you have any questions, please feel free to contact Moso LED..

Sturdy bracket Strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber High quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Simplifies the installation of Nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks. Wide application Can be used on tubes of 1, 1-12, 1-34 2 In diameter and applied to LED light bar for almost all kinds of vehicle. Easy installation Pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 2Pcs LED light bar mounting bracket.

LIVE WITHOUT LIMITS - Don't be held back by one-dimensional bar clamps. Our unique clamping system features a 360-degree rotating neck designed to give you even more control over your light placement, regardless of the position or angle of your bars.. HANG ON TIGHT - Aggressive, straight knurling on the mounting surfaces gives your lights the traction they need to hold on through the harshest terrain. And with a zero-slip, locking stud design, these clamps wont twist when you twist the throttle.. ROCK SOLID - On the trail, there's no room for weak hardware. Engineered to be thicker and more durable than other bar clamps and equipped with rugged stainless steel bolts, these bar clamps have earned their place at the top of the podium.. UNYIELDING PROTECTION - Specially designed rubber inserts shield your lights against damaging vibrations, provide an unequaled level of light stabilization, and protect against the unforgiving conditions of the off-road.. UNMATCHED VERSATILITY - Go anywhere with a clamp that is as flexible as your machine. These clamps include adapters to fit 1, 1.5, 1.75, and 2 bars and two different length mounting neck with studs for added clearance adjustment..

Strong Hold Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road.. High Compatibility Can be used on the hood or roof to mount any side-mounted light bars, straight or curved, single row, double row, triple row, or quad row. All works well and still remain ample room to adjust the mounting angle of the light.. Dual Mounting Functions Directions Can be used as a whole to mount side-mounted light, or remove L shape bracket, just use the magnetic base to mount bottom-mounted light. For the L shape bracket, you can also choose to mount them inward or outward.. Easier Mounting No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please check the 9th picture on the left.. Package Include 2 x magnetic mounting brackets with sucker base. Fit Type Universal Fit.