Top 8 Best Miter Saw Fence

MOTOR Powerful 15 amp motor with 1,950 W of output power smoothly powers through hardwoods with ease. MITER SCALE RANGES from 0-52 degrees, both to the right and left, for a broader range of cuts. FENCE Tall, pivoting aluminum fence that stands at a height of 5-18 In. allows crown molding to be cut vertically. MICRO BEVEL After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle. THUMB ACTUATED POSITIVE STOPS Miter angles can be quickly adjusted.

180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at 22-12-Degree. Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit. Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control. 110th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length. Removable Retaining Clip for T-Slot Miter Channels.

Includes 1 table saw miter gauge, 1 multi-track miter fence, 1 t-track flip stop. Function cost effective 3-piece set designed to give you everything you need to produce higher precision cuts including cross cutting while quick and accurate project results. High precision miter gauge features 27 angle indexing stops with 1-degree step spacing and positive stops at 0, 10, 22, 30 and 45 and nine others, both left and right. Multi-track miter fence smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 14-20 hex Bots, 14 t-bolts and 516 T- bolts. Miter saw flip stop delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.

Engraved stainless steel primary scale for precision accuracy. 41 laser cut V-stops for extreme accuracy at all popular angles. Patented GlideLOCK miter bar with 6 expansion points for quick repeats. 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths. INCRA Flip Shop Stop-Fence Positioner for optimal mitering accuracy.

Capitalizing on a great idea, the folks at Incra. The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut. Table saw that blends incremental angle control and a special 3-panel sled. Precision angle indexing teeth are laser cut in solid steel. 364 lock solid angle stops in 12-degree increments. Ten expansion disks adjust both sides of the bar for zero side play. Hold down clamp locks your work piece onto the sled.

Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT. Laser Marker System for exact alignment and predictable blade placement. Fully adjustable LED work light illuminates the table from any angle for bright visibility. Positive miter stops for quick adjustments to 15, 22.5, 31.6, and 45 degrees to the left and right. Precise compound cuts with 48 degree bevel angle left and 5 degree bevel angle right.

Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches. Gauge head is CNC machine perfectly square to the bar and table no stampings. Vernier scale allows fast, 110th-degree angle adjustments. Our extremely straight 24 inch 610mm anodized-aluminum bar is 38 inch9.5mm thick by 34 inch19mm wide and features five bar adjusters that you can use to eliminate play in the miter slot with the turn of a screwdriver. Microadjuster allows additional angle adjustment to 1100th degree. Positive stops at 0, 10, 22-12, 30 and 45-degrees limited lifetime warranty.

Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops. The mitre saw has a precise miter system and machined base fence support. Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw. Tall sliding fences support 6-34-inch base vertically. Bevels 0 degree - 48degree left and right. 2-inch x 14-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 10-inch dimensional lumber at 45 degree. Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings for accuracy and durability. Efficient dust collection system captures over 75 of dust generated. Oversized, high visibility bevel scale with positive stops..

When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts.. The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence.. Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simply be flipped it up and out of your way when not in use.. The Fulton Aluminum Miter Fence is made from one, solid piece of extruded aluminum and has the exact same size track on the top of the fence as there is on the bottom. On the back, there is an offset track for mounting the fence to a miter gauge.. The fence can be mounted to low profile miter gauges or standard profile miter gauges simply by flipping the fence over to accommodate your miter gauge. This fence will fit most available after market and factory table saw miter gauges, however some modification may be required. Full color installation instructions are included..

Dock Lock the included INCRA Miter Gauge in Seconds. Removable t-slot retaining clips adjustable miter bar. GlideLOCK Miter Bar - The Miter 1000SE's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels. Special Edition Telescoping INCRA-LOCK Fence. Special Edition 110th Vernier Cursor. Table size For adequate support, the Miter Express requires a minimum of 11 from the side of the blade to either the left or right edges of the saw sled can be installed on either side of the blade..