Top 8 Best Mitter Saw

10 Compound Miter Saw. MOTOR 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM. LIGHTWEIGHT Only 24.2 lbs. to facilitate maneuverability and portability. MITER ANGLE RANGE 0-52 degrees, to the right and left for increased flexibility. BEVEL RANGE 0-45 degrees, to the left with adjustable bevel stops for precision cuts. LARGE TABLE Offers better material support with vice clamping system to secure work piece. THUMB ACTUATED POSITIVE STOPS For quick miter adjustments. HORIZONTAL HANDLE For a secure hold. WARRANTY Covered by Metabo HPT's Professional 5-Year Tool Warranty.

Miter angle fine adjust with detent override makes it simple to dial-in precise miter angles. Miter angle digital readout provides repeatable accuracy to 0.1 degree. Dual integral job-site lights fully illuminate the work piece and cut line from either side of the blade. 15-amp, 3.3 max hp direct-drive motor provides increased power for high-performance cutting in hard lumber. Integral dust channel captures 75 percent of all dust and debris.

Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops. The mitre saw has a precise miter system and machined base fence support. Tall sliding fence of DEWALT miter saw supports 4-14-inch base vertically. Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree.

Compact and Lightweight Design for Job Site Portability. Powerful 10.5 AMP direct drive motor requires less maintenance and delivers 5,000 RPM. Miters 0-50 Degrees left 0-60 Degrees right, with positive stops at 0, 15, 22.5, 31.6, 45 and 50 Degrees left and right plus 60 Degrees right. Compact and lightweight 31.1 lbs. for job site portability. Cuts up to 12 at 90Degrees and 8-12 at 45Degrees.

POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts. DUAL BEVEL Perform cuts in four positive stop positions at 48 45 left, 0, and 45 right. LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers. 2x12 CUTTING CAPACITY Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees. CUTS AT COMMON ANGLES - Cuts up to 50 degrees left and right with 11 positive stops at most used angles.

Integrated cut line cross-cut positioning system of DEWALT 20V miter saw provides adjustment-free cut line indication for better accuracy and visibility. The mitre saw has the capacity to cup 3 58-inch nested crown and 3 12-inch base vertically. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy for DEWALT miter saw. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design 30 lbs. allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Precise miter system and machined base fence support optimize durability and cutting accuracy.

Make bevel cuts up to 45 degrees left perform compound Miter cuts with ease. Use compound cutting for crown molding, shadow boxes, Picture frames, and more the Genesis compound Miter saw is inexpensive and versatile. Laser cutting guide for quicker alignment and improved accuracy Know where the cut will be ahead of time with the integrated laser guide. Electric brake stops the blade in seconds and Arbor lock for quick blade changes. Includes 60T Carbide blade installed, hold down Clamp, dust bag, Two extension wings, blade wrench and two AAA batteries for laser. Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles. Arbor lock for quick blade changes. Die cast aluminum base for portability and better accuracy. 9 Positive detent miter stops lock firmly in place for faster setup and accurate cuts. Max Cutting Capacity 45x45 H 1-38 x W3-516.

10 slide miter saw with the Crown molding cutting capacity 6-58 nested of a 12 miter saw. Linear ball bearing system engineered to deliver dead-on accurate cuts. Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity 5-14. Unique 2-steel rail sliding system design offers single slide-glide operation reducing saw's footprint and allowing operation flush against a wall. Less weight 57.9 lbs. and the most compact design in its Class for easy jobsite portability.

Same tools. New name. Hitachi power tools has renamed to Metabo HPT. Motor Powerful 15 amp motor to tackle tough cutting jobs with ease. Compact Slide System Allows the saw head to slide along fixed rails, eliminating the need for rear clearance. Includes C12RSH2S miter saw, 12 inch 60T TCT Saw Blade, Dust Bag, Vice Assembly, 17mm Box Wrench. Large Sliding Fences Raise fence height to 5-18 inches to cut up to 7-12 Crown molding vertically.

ACCURATEFeatures easy-to-read precision laser engraved scales, protractor allows direct angle reading to the miter saw. Perfect for crown molding, trim work, and a variety of other carpentry applications.. O BODY DESIGNSaker Miter Saw Protractor is of O shape design during operation and ensures smooth precise read on insideoutside corners, Crafted from precision CNC-machined aluminum alloy.. EASY TO CARRY Saker Miter Saw Protractor is made of lightweight plastic, which has great corrosion and wear resistance, extending the lifespan. Also, its small size and lightweight material makes it easy to carry.. WIDE APPLICATION Whether you are a professional or not, Saker Miter Saw Protractor is excellent for you. It is suitable for crown molding, miter cuts, carpentry, plumbing, metalworking and more.. ServiceWe Are Confident In the Quality of the Product. In the Process of Daily Use, If the Product Has Quality Problems or Have any Questions About the Product, Please Feel Free To Contact Us, We Are Always There..