Click here to learn more about these products.
Mitutoyo 513-402-10E DIAL TI, BAS, STD 0.03", 0.0002" Accuracy, 0.0005", White
Contact point effective length is printed on the dial face. Increased impact resistance and durability of gears and bezel. Inspection certificate included with bidirectional evaluation. Increased scratch-resistance of crystal.
Mitutoyo 513-473-10E DIAL TI, BAS, STD 0.008", 0.00004" Accuracy, 0.0001", White
Contact point effective length is printed on the dial face. Increased impact resistance and durability of gears and bezel. Inspection certificate included with bidirectional evaluation. Increased scratch-resistance of crystal.
Mitutoyo 543-472B Absolute Digimatic Indicator, ID-C Standard Type, #4-48 UNF Thread, 3/8" Stem Dia., Flat Back, 0-1" (0-25.4mm) Range, 0.00005" (0.001mm) Resolution, +/-0.0001" Accuracy, Meets IP42 S
Electronic indicator measures 0 to 1 0 to 25.4mm with 0.00005 0.001mm resolution and or - 0.0001 accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. LCD screen displays measurements in inches and metric units, gono-go display lights red or green when upper and lower tolerances have been set, and indicator face can be rotated 330 degrees for reading from different angles. Stem has 38 diameter and a 4-48 UNF contact point thread mount, and unit has a flat back for stemplate mounting. Absolute electrostatic capacitance-type linear encoder for accurate measurements. Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water.
Mitutoyo 513-402-10T DIAL TI, Full, STD 0.03", 0.0002" Accuracy, 0.0005", White
Contact point effective length is printed on the dial face. Increased impact resistance and durability of gears and bezel. Inspection certificate included with bidirectional evaluation. Increased scratch-resistance of crystal.
Mitutoyo 513-403-10T DIAL TI, Full, STD 0.008", 0.00004" Accuracy, 0.0001", White
Contact point effective length is printed on the dial face. Increased impact resistance and durability of gears and bezel. Inspection certificate included with bidirectional evaluation. Increased scratch-resistance of crystal.
Mitutoyo 543-558A Absolute LCD Digimatic Indicator ID-F, with Back-Lit LCD, #4-48 UNF Thread, 0.375" Stem Dia., 0-2"/0-50.8mm Range, +/-0.00012" Accuracy
LCD display converts between English and metric units, has six user-selectable resolutions with a maximum resolution of 0.0005 0.001 mm, an accuracy of or - 0.00012 0.003 mm, and a total measurement range of 0-2 0-50.8 mm. Sealed housing meets Ingress Protection Rating 30 IP30 standards for dust and water protection, has a 38 diameter stem, a steel ball contact point, and a flat back. Displays maximum and minimum value hold, the difference between high and low values, changes from green to red when user-defined tolerances are exceeded, and can be set to zero at any spindle position for measuring in either or both directions. Backup memory retains setup conditions, and alarm indicates overflow error, tolerance limit setting error, and scale contamination. SPC data output, and choice of two power sources AC or 9V battery.
Mitutoyo 64PKA079 Magnetic Stand With Dial Indicator, 1" Travel, 0.001" Graduation
0.001 X 1 travel dial indicator. Dial indicator crystal is hard coated to resist scratches. Magnetic Stand have 132 Lbf of magnetic force to help prevent damage to indicators and probes due to accidental base fall-over.. Magnetic Stand accept all AGD-type dial indicators, test indicators and probes having .375, 6mm or 8mm diameter stems andor lug back with 14 diameter mounting hole. The OnOff switch offers instant mounting and dismounting without any adverse effect to the indicators or work surface.
Mitutoyo 543-793 Absolute Digimatic Indicator, ID-S-Type, Lug Back, #4-48 UNF Thread, 3/8" Stem Dia., 0-0.5" Range, 0.0001" Resolution, +/-0.00012" Accuracy, Meets IP42 Specifications
Electronic indicator measures 0 to 0.5 0 to 12.7mm with 0.0001 0.001mm resolution and or - 0.00012 accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. LCD displays in both inches and metric units, and indicator has a lug back for mounting from the rear of the indicator. Absolute electrostatic capacitance-type linear encoder for accurate measurements. 38 diameter stem and a 4-48 UNF contact point thread mount. Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water.
Mitutoyo 543-492B, IDC Digimatic Indicator, .00005"/.0001"/.0005"/0.001mm/0.01mm X 2", 3/8" Stem, Flat Back
Absolute Encoder ensures all settings and readings maintained for the life of the battery even when the power is turned off. Preset, Zero-Set, inchmm, - direction and GONG functions SPC output. Face rotates 330 for use at various angles. Calculation function fxAx allows the spindle reading to be multiplied by a constant ie 2X or .5X. Average battery life 7,000hours using SR-44 battery.
Mitutoyo 543-783B Absolute Digimatic Indicator, ID-S-Type, Flat Back, #4-48 UNF Thread, 3/8" Stem Dia., 0-0.5" Range, 0.0005" Resolution, +/-0.0008" Accuracy, Meets IP42 Specifications
Electronic indicator measures 0 to 0.5 0 to 12.7mm with 0.0005 0.01mm resolution and or - 0.0008 accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. LCD displays in both inches and metric units, and indicator has a flat back for stemplate mounting. Absolute electrostatic capacitance-type linear encoder for accurate measurements. 38 diameter stem and a 4-48 UNF contact point thread mount. Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water.
Best Choice
Best Value
