Top 8 Best Pcie Sata Card

2 Port SATA 3.0support AHCI 1.0 mode and IDE mode, bus interface PCI-Express x1 slot, expansion interface 2 SATA 3.0 interfaces. Support system Win10 Win8 Win7 WinXP VistaLinux.System requirements There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16. Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed. Support hot swap, plug and play, easy to use.. Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0, SATA1.0, conform to PCI-Express v2.0 specification, and backward compatible with PCI-Express v1.0..

You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.. 4 Ports Adapter Card --- You could add 4 6Gbs SATA 3.0 devices to your computer with this PCIe SATA card.. Chipset --- With using The Marvell 88SE9215 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.. For All PCs --- with a low profile Bracket and 4 SATA Cablecompatible with 99 size chassis on the market.. System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP 2003 7 8 10 MAC NAS Linux OS..

8 Ports Integrated on One SATA Card With SupaHub 8 port PCIe SATA card, you are able to add 8 SATA III 6Gbs drives for your desktop. Lenovo and Dell computers block the BIOS interface of any third-party SATA Controller, it may lead to unpredictable compatibility issues or the SATA card can not be read. Lenovo and Dell computer users should be careful when placing an order for SATA controller card.. Built-in Marvell 88SE9215 JMicron JMB5xx chip, the stability and compatibility of this PCIe to SATA card have been improved. This PCIe SATA card does not support RAID.. Supports Windows 7810. Driver installation is required to avoid issues like not all ports working won't power up slot empty. Multiple hard drives requires sufficient power so that to avoid drop channel not working an so on. Using multiple OS only supports Windows. You must turn off the power before pluging the SATA PCIe card into motherboard or removing it.. Compliant with PCI-Express v2.0 specifications, backward compatible with PCI-Express v1.0. For higher speed, motherboard needs to be PCIe 2.0GEN2, fastest speed 380-450 MBs or above, plug the 8 port SATA PCIe card into x16 slot. Old motherboard x16 slot probably reach PCIe 2.0 speed, but other slotsx148 not. Fastest PCIe 1.0 GEN1 speed with is 200-300 MBs. Actual speed depends on PCIe bandwidth of motherboard. If all ports are used at the same time, the speed will be slow down.. PCIe x1 interface This SATA expansion card 8 Port is compatible with PCIe x1, x4, x8, x16, not compatible with PCI slot. PRODUCT AFTER-SALES i If the product is damaged during delivery, please contact us directly for better response. ii Buyers without CD-ROM, or the CD doesnt work, please contact us for driver download link. iii Please feel free to contact us if you have any question..

Efficient - You could add four 6Gbpss SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbpss and 3 Gbpss. High Performance - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported. Support System - The SATA expansion card supports Windows XP 7 8 10 Mac NAS Linux OS, no driver required. Support install Windows OS from Win10 PE. For All PCs - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1 X4 X8 X16 slot. Please Note - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.

PCIe to SATA 3.0 2 Port Expansion Card with a low profile Bracket and 2 SATA Cable. Built in 2 SATA3.0 interfaces, Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA III at 1.53.0Gbps. Support IDE or AHCI programming interface. Compliant with Serial SATA version 3.0 Compliant with PCI-E 2.0 specification. Connect 2 mass storage devices at the same time. Compatible with Windows XPServer 2003Vista783264 bit10MACLinux OS.

Built in 4 SATA3.0 interfaces, Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA 1.02.0 of 1.53.0Gbps.. With using The ASM1064 chip, improve this card more stable and compatible.. You could make the system to boot from this adapter but non RAID. If your motherboard has RAID function, you could make a RAID with this adapter.. With a low profile Bracket and 4 SATA Cablecompatible with 99 size chassis on the market.. Connect four large capacity storage devices at the same time. Compatible with Windows XP 7 8 10 MAC NAS Linux OS..

Sata Expansion CardIf you want a simple and small solution to expand your sata storage by 10x then this is the way to go. Fits nicely between two pcie cards with all 10 sata slots plugged and working.. Pcie To SataChipASM 1166 Supports SATA 3.0, backward compatible with SATA 2.0 and SATA 1.0.Equipped with 10 SATA 3.0 ports, compliant with Serial ATA 2.0 specification, transfer rate up to 6Gdbs, support SATA interface for high-capacity HDDSSDoptical drive. Easy to useWorks strait out of the box no Drivers needed.. System SupportSupport Windows 10 8 7 Vista XP 3264-bit and more operating system.. ServiceWe have professional RD team, will continue to launch new products to meet customer needs and thank you for your supporting.If you have any questions, please feel free to contact us..

WIDE COMPATIBILITY--Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0 PCI-Express v2.0 compliant, backward compatible with PCI-Express v1.0.Fit For Windows 78XP10,fit for Ubuntu system.. HIGH SPEEDS--Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.. SUPPORTS MODE--Supports AHCI1.0 mode and IDE mode, native command queue NCQ, FIS based on port multiplier switch or command switching and hot plug.. WARM TIPS--Compatible with SATA6G, 3G and 1.5G hard drives.User with SATA3.0 data cable for best results.PCI-E must have a slot above V2.0, V1.0 will not exceed 250M, PCI-E can be X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly into X16 slot on.. CUSTOMER SERVICE--We guarantee the product is 100 brand new. Please feel free to contact us if you have any problems, we will give you a satisfactory answer..

RIITOP PCIe SATA Card allows you add Extra 6x SATA 3.0 Ports via PCI-e x4x8x16 slot to your mainboard, No drivers need. Easy to install, Plug and play. Chipset and Speed - RIITOP PCIe to SATA Adapter adopts AMS1166 master chipset, more stable and compatible, PCI-e x4 Gen3 transmission. Supports SATA transfer rate up to SATA III 6Gbps, backward compatible with SATA II 3Gbps, SATA I 1.5Gbps. Hardware Requirement - Available PCI-e x4x8x16 on Mainboard. Recommend install RIITOP SATA3 Card on PCI-e 3.0 or 4.0, the PCI-e SATA 3 Card will work on full-speed. Please Note This SATA PCIe Card can not be installed on PCI-e x1 Slot. Compatibility 1. Hardware Compatibility Support 2.5inch SSDHDD, 3.5inch HDD, 5.25inch Blu-ray drive and other SATA Interface Devices 2. Systems Windows 10 8 Server 2008R2 NAS Synology Ubuntu Linux OS. Package including 1x RIITOP SATA PCIe Card 6Ports 6x SATA Cables 1x Low-Profile Bracket.

1.The PCE-G2S6 PCIE Gen3 X4 interface to 6-ports NONE-RAID SATA III 6Gbps card will allow users add 6X SATA III ports on desktop PCs, Servers, and NAS systems for storage expansions or AHCI boot use.. 2.Based on 1X ASMedia ASM1166 PCIE 3.0 Serial ATA advantage HCI controller. PCIE 3.0 X4 communication 16Gbps total bandwidth. Provide 6X SATA III 6Gbps ports for PCs and Servers.. 3.Support Plug and Play on Windows OS, MAC OS, and Linux Kernel system. AMD, ARM, INTEL, and MAC platform.. 4.Complies with Serial ATA Revision 3.2. Support SATA III speed 6Gbps, SATA II speed 3Gbps, SATA 1 speed 1.5Gbps.. 5.PCIE Gen3 X4 interface design, will works on PCIE X4, X8, X16 slot only, NOT works on PCIE X1 slot. Users need to check if PCs or Servers have at least one PCIE X4, X8, X16 slot on mother board before purchase..