Top 8 Best Pcie Sata Expansion Card

You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.. 4 Ports Adapter Card --- You could add 4 6Gbs SATA 3.0 devices to your computer with this PCIe SATA card.. Chipset --- With using The Asmedia1062 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.. For All PCs --- with a low profile Bracket and 4 SATA Cablecompatible with 99 size chassis on the market.. System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP 2003 7 8 10 MAC NAS Linux OS.Any question please connect us Ziyituodevisionde.com.

This expansion card can support connecting 10 large- capacity SATA storage devices to use at the same time, and the SATA 3.0 interface speed can reach up to 6Gbps. PCI-e interface x1 uses immersed gold technology with thickened gold-plated gold fingers, better contact, easy data transmission, effectively reduce packet loss rate, and is compatible with PCI-e X1, X4, X8, X16 slots. Use ASMedia chip to improve compatibility and stability, while enlarging the heat sink, the heat dissipation effect is better. Supports WinXP2003VistaWin7Win8Win103264bit operating systems. Note Only 2 disks are supported without a driver, and 10 disks can be supported after the driver is installed, and raid is not supported.

2 Port SATA 3.0support AHCI 1.0 mode and IDE mode, bus interface PCI-Express x1 slot, expansion interface 2 SATA 3.0 interfaces. Support system Win10 Win8 Win7 WinXP VistaLinux.System requirements There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16. Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed. Support hot swap, plug and play, easy to use.. Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0, SATA1.0, conform to PCI-Express v2.0 specification, and backward compatible with PCI-Express v1.0..

It connects four 6 Gbps SATA3.0 SSD or HDD to your desktop computer with 4 SATA cable to improve your system performance and expand overall internal storage. NO-Support Raid.. The 4 ports SATA controller base on ASMedia ASM1064 chip, more stable and wider compatible. Port Multiplier Command-based switching supported.. Compliant with SATA3.0 standards, backward compatible with SATA1.0 and SATA2.0. Support PCIe1.0, 2.0, 3.0 protocol on motherbaord PCIe X1, X2, X4, X8, X16 slot. PCIe 3.0 X1 interface provide 8Gbps total bandwidth, each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage.. Full height and low profile bracket included.. Supports Windows 7810, Windows Server 2008 R22012 R220162019, RHELCentOS 678, Debian 91011, Ubuntu 16182021, SUES 111215, FreeBSD 111213, VMware ESXi 567..

Efficient - You could add four 6Gbpss SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbpss and 3 Gbpss. High Performance - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported. Support System - The SATA expansion card supports Windows XP 7 8 10 Mac NAS Linux OS, no driver required. Support install Windows OS from Win10 PE. For All PCs - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1 X4 X8 X16 slot. Please Note - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.

1. The FS-S6-Pro is a PCI express 3.0 X4 interface to 6-Ports 6 Gbps max speed SATA III expansion card. It allows users add 6X NONE-RAID SATA III storage or AHCI BOOT UP HDDsSSDs on desktop PCs, Working Stations, MAC Pros and Network Attached Storage NAS.. 2. Select the ASMedia ASM1166 the most stable NONE-RAID PCIE 3.0 SATA III host controller. PCIE 3.0 X4 interface, provide 16Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI BOOT UP or storage for HDDsSSDs.. 3. Plug and Play on Windows 11, 10, 8.x, 7, Vista, XP 3264bit and Windows Server 2022, 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 3264. MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X, 10.9.x, 10.10.x, 10.11.x, 10.12.x, 10.13.x, 10.14.x, 10.15.x and most of Linux kernel systems.. 4.Compatible with Serial ATASATA Revision 3.1 specifications, auto switch to SATA 3.0 6Gbps max speed. Backward compatible with SATA 1.0 1.5Gbps speed and SATA 2.0 3Gbps speed. Support PCIE 1.0, 2.0, 3.0, 4.0 protocol and works on motherbaord PCIE X4, X8, X16 slot.. 5.Warning 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI BOOT UP mode or it will report Blue Screen Death BSD. 2. Make sure PCs power supply unit PSU can provide 6X max SATA interface power connector. 3. Users must make sure Motherboards have at least one PCIE X16 slot before purchase. 4. Slim PCs need user change to low profile bracket..

Comprehensive compatibility The ACTIMED PCI-E to 4 SATA port expansion card supports PCIE 3.0 slots and is backward compatible with PCIE 2.0 slots. With SATA 3.0 interface and backward compatible with SATA 2.0 1.0 interface.. Security and stability Marvell 88SE9215 chipset to improve the stability and security of PCIE SATA cards. A heatsink is included for good temperature control to prevent damage caused by high temperatures.. Plug and Play Easy installation, plug and play, hot-swappable support. the fastest speed of PCI-E 3.0 slot is 500-550 MS. the fastest speed of PCI-E 2.0 slot is 380-450 MS. when connected to PCI-E 1.0 slot, the speed is only 200-300 MS. Please check with your motherboard manufacturer for supported PCI-E versions.. Compatible slots and systems SATA controller PCI-E X1 interface compatible with 1X4X8X16 slots transfer speeds up to SATA III 6 Gbits. Supports Windows 7810XP20032008Linux.. Includes all required accessories a 4-port SATA expansion card, a SATA 15 PIN 1 to 4 power cable, 4 SATA data cables, a low profile bracket, screwdriver and screws, installation CD. Give you a convenient and fast shopping experience..

Using a ASM1806 PCIe bridge elimate the need for a Port Multiper when combining the Dual Marvell 9215 Chipset allowing to reach maximum bandwidth per port.. Compliant with PCI-Ecpress Specification v2.0 and backwards compatible with PCI-E 1.x. Supports Communication Speeds 6.0 Gbps, 3.0 Gbps, 1.5 Gbps. Support Native Command Queue NCQ. Support Hot plug and Hot Swap.. Supports AHCI 1.0 programming interface registers for the SATA controller.

Support 5 SATA Gen3 6Gbps ports. Aluminum alloy heatsink for great stability and heat dissipation. M.2 PCIe NVMe interface. Support device sleep power management. Plug play with no additional driver necessary. Support SATA plug-in detection. Comply with SATA Specification Revision 3.2..

PCI-E to SATA 3.0 expansion cardUse with SATA3.0 data cable for best results. with 8 x SATA3.0 interfaces expansion interface.. SATA ControllerCompatible with SATA6G, 3G and 1.5G hard drives. Fit for Windows 78 XP 10 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface.. Serial ATA 3.0Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0 PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0.. AHCI1.0 Mode and IDE ModeSupports AHCI1.0 mode and IDE mode, native command queue NCQ, FIS based on port multiplier switch or command switching, and hot plug.. 6.0 Gbits 3.0 Gbits 1.5 Gbits TransmissionSupports communication speeds of 6.0 Gbits, 3.0 Gbits and 1.5 Gbits supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i..