Top 8 Best Pei Sheet

Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms e.g. borosilicate glass. Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI simply peel back the tape liner for quick adhesion to the bed. Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints clean with isopropypl alcohol between prints or with acetone on a COLD bed. ABS and PLA filaments along with many other materials print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. Dimensions 235 x 235mm PEI thickness 0.56mm 0.022 inches Laminated 3M 468MP adhesive thickness 0.13mm 0.005 inches Fits the Creality Ender 3 or Creality CR 20 perfectly.

Size - 235x235mm9.2x9.2in. Applicable models Ender 3 Ender 3 Pro Ender 3S Ender 3v2 CR 20 CR 20 Pro Ender 5 Ender 5 Pro, or other hot bed size 235x235mm9.2x9.2in model. Compatible with PLAPETGPEEKABS and any other filaments.. Excellent Adhesion Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.. Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate. High strength and reusable.. DIY - The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. Note - If you have any question or need technical support about the product, Please press Ask a question through our storefront's page, report an issue through the Your Orders page. We will respond with 24 hours..

Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms e.g. borosilicate glass. Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI simply peel back the tape liner for quick adhesion to the bed. Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints clean with isopropypl alcohol between prints or with acetone on a COLD bed. ABS and PLA filaments along with many other materials print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. PEI Dimensions 310mm x 320mm x 0.56mm Laminated 3M 468MP adhesive thickness 0.13mm 0.005 inches Fits the Creality CR-10S Pro v2 printer and others perfectly.

Material -- 100 PEI, Ultem1000, resistant to Acetone, amber color. Pre-applied Tape -- PEI sheet comes with pre-applied 3M 468Mp tape, the surface will not produce any man-made air bubble, saving the effort of applying the adhesive tape. Durable and Reusable -- Little Cleanup after multiple prints, Adhesive transfer tape sheets is easy to wash with water and soap or use alcohol for quick cleaning in between prints. ABS and PLA Filaments -- ABS and PLA filaments along with many other materials print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. Easy to Cut -- You can cut the Ultem sheet down to your desired size, in which case strips may work better or using the strips because it may be easier to apply as opposed to one huge sheet.

Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms e.g. borosilicate glass. Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI simply peel back the tape liner for quick adhesion to the bed. Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints clean with isopropypl alcohol between prints or with acetone on a COLD bed. ABS and PLA filaments along with many other materials print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. Dimensions 220 x 220mm PEI thickness 0.56mm 0.022 inches Laminated 3M 468MP adhesive thickness 0.13mm 0.005 inches.

The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.. The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.. Excellent adhesion can be achieved when the temperature of the heated bed is about 60, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.. The size of HICTOP glass bed is 235235mm9.259.25inch, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 ProCR-20, CR-20 Pro and similarly sized machines..

Excellent PEI Platfrom for 3D Printer Heated Bed with strong Adhesive, compatible with ABS, PLA, HIPS and other filaments, no need for additional adhesives, tapes, or slurry.. Special Import Material made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance up to 340 F, it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.. Size 12.2x12.2 310mm x 310mm. thickness is only 0.01 0.3mm, very thin and level to be table top flat.. Reuse for multiple prints, just wipe down with isopropy alcohl between prints for best results, the PEI sheets also can be easily cut down to desired size by scoring with a utility knife or blade.. After-sales Support each one defective item can have the free replace or refund, If need more further please fell free to email or QA us, we and our engineers are very happy to assist you..

1.HICTOP Magnetic PEI sheet has two sidesThe side with the pei surface layer faces up to contact the extruder, and the printed work will also be produced on this side.The other side is a magnetic base plate with a 3m sticker, just stick this side on the hot bed.. 2.Easy to apply,clean and use.After printing, wait a while when the hot bed reaches room temperature, the printed work can be easily removed.Even if its a little stuck,flex slightly to pop your print right off.. 3.Pei 235mm fits on Creality Ender 3 series such as Ender-3 ProEnder-3 V2Ender-SEnder-5 Pro and CP-01.. 4.Compatible with PLAPETGTPUABS.. 5.When the temperature of the heating bed reaches about 60, the printed work can be well attached to the surface of the pei sheet without any glue, tape, or tools..

Newly upgraded PEI coated steel plate, double PEI side can for printing bed.. Size300 x 300mm11.8x11.8 inch,measure your build plate, don't refer to build volume.Fits TAZ Workhorse, TAZ Pro, TAZ 6, TAZ 5, TAZ 4, TAZ 3, may fit A8 plus,et5 and et5 pro. It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.. Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, PETG, TPU,PUA, etc.. After-sales Guarantee each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you..

Excellent PEI Platfrom for 3D Printer Heated Bed with strong 3M Adhesive, compatible with ABS, PLA, HIPS and other filaments, no need for additional adhesives, tapes, or slurry.. Size 10x10 254mm x 254mm. thickness is only 0.01 0.3mm, very thin and level to be table top flat.. Special Import Material made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance up to 340 F, it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results, the PEI sheets also can be easily cut down to desired size by scoring with a utility knife or blade.. After-sales Support each one defective item can have the free replace or refund, If need more further please fell free to email or QA us, we and our engineers are very happy to assist you..