Top 8 Best Pwm Fan Hub

CABLE MANAGEMENT Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. TECHNICAL DETAILS Output 10 x 4-pin PWM Socket, Output Current up to 1 A per Port, Input SATA Power 4-pin Fan Header, Input Current up to 4.5 A, Dimensions 55.6 x 86.3 x 14.3 mm, Weight 50 g.

Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.. Widely Compatible The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.. Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean tidy.. Package contents 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug..

If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. DeepCool SC700 ARGB hub is highly recommended with FH-10 fan hub as a combo solution for multi ARGB-PWM fans build.. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1 can be identified by the system.. Capable of connecting to 10 PC fans simultaneously for cooling the computer system.. Powered by a stable SATA connection to the system PSU for up to 10 fans.. Velcro and screw mountings applicable for the tower interiors..

Supports 10 4-pin Independent Fans Capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis. Direct SATA Power Input Powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use. Included TiesVelcro for Easy Placement 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place. Blue LED Power Indicator.

10 sets of PWM fan interface up to 10 sets of PWM fans can be installed at the same time, convenient installation method, making the installation more efficient. SATA power line direct output Master 1to10PWM hub adopts Satan power direct output, which is more concise, more efficient and more stable. Effective cable management CoolerMaster 1to10PWM hub has 5 sets of fan jacks on the left and right sides, which is convenient for installation and creates a neat and neat computer space. Powerful magnetic design CoolerMaster1to10PWM hub adopts super magnetic design, which can be adsorbed on the metal surface of the chassis and can be placed at will. Small and exquisite size, save space small and exquisite shape, save more space, make the internal wires of your case more tidy.

1-to-8 PWM connectors. 2200F capacitor provides stable voltage. Support speed detection for accurately controlling fans.

MOST EFFICIENT SATA TO FAN ADAPTER IN 2019 Managing multiple fans from a single case input has become easier for you now. If your motherboard lacks fan interfaces, use this neat tidy way to add fans expand fan interfaces designed for 12 V 4-pin fan. This PWM hub SATA accurately controls fan speed, you can slow down speed up the fans up to the maximum speed. You need to connect the SATA the 4 pin at the same time to run multiple fans.. PWM FAN CONTROLLER TEMPERATURE CONTROL The CPU Port red port, would be the only port that can be controlled by the operating system. The other 9 black fan ports CAN NOT be adjusted in speed and will copy the power level of what the red port is at. Please note 4 Pin fan speed can be adjusted by temperature control as well. 3 Pin fans may also be used but have no PWM function and will stay at it's fixed speed after inserting.. INSTALLATION CONFIGURATION Simple installation easy configuration, this fan splitter will work even if only connected to the PSU with SATA connector. You just plug the board into the CPU fan motherboard connection then SATA for power. It has EVA double-sided adhesive tape at the back of the hub to mount to the case or any flat place. You can fix the screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. STEP BY STEP SET-UP You will receive 1 hub 1 PWM connector in your package. The PWM interface is connected to CPU fan interface on motherboard by PWM cable the red interface is dedicated for CPU fan. Connect 1 fan to the red port on fan hub then connect remaining fans. You then need to connect the fan hubs PWM cable to the motherboard. Connect the power supply SATA cable to fan hub before you attachstick it on the chassis.. MONEY BACK PRODUCT WARRANTY Our product is backed up by manufacturers warranty so feel free to contact us for any query or information. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations. Just in case the product falls short of your expectations in any manner, you can return it for a 100 refund. We will go an extra mile to redress the situation at hand..

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note Max current limit is 3A in total, check the spec of fan first.. In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface with speed detection function. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.. There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.. Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.. If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..

This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB 5V 3pin plugs and PWM 12V 4pin plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans speed and color.. This CPU Cooling SATA Hub is powered by SATA 15PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.. The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.. The black hub is perfectly integrated with chassis. Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop.. The PWM ARGB hub is equipped with two connecting cables. Both length of the wires is 53 cm. The red port on the hub is a professional port for the CPU fan. Gold-plated pins, solid materials, strong and durable..