Top 8 Best Rv Led Tail Lights

This RV tail light serves four functions stop light, turn signal light, and taillight, and backup light in the center, this is white LEDs. It is a really nice low profile light for the back of your trailer or RV or motor home. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on. This rectangular trailer light has a surface mount installation, so it mounts directly on the surface of your trailer, of your application, screws included for mounting. With two reflector strips built in top and bottom, it can be mounted oriented horizontally or vertically, whatever suits your application. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light. This Triple LED Trailer Light is hardwired with 6 wires White is the ground, Blue is backupreverse light, green and yellow is high mode for stop or turn signals, blackwith 13 yellow and brownwith 13 green is low mode for tail or running lights. Overall dimensions Overall length is 14 inches approx., and overall width is about 6-78 inches, and the light is about half an inch thick, but with the little knob where the wires all come out, it's about 1 inch, so you may need to cut out a hole to allow that to go in. The spot knob is about 1 316 inch in diameter. Really a nice slim profile unit. Package included 2pcs rectangular trailer lights Screws included We truly offer 1 year warranty If have any questions or issues about our Triple LED Taillights , Please feel free to us and we will reply in 24 hours.

8-58 x 3-78 Rectangle Trailer Tail light Kit serves 3 functions stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base.. left hand driver's side 27 Diodes 22 Red5 White Right Hand Passenger's Side 22 Diodes this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there's not bulbs to replace, or not brittle filaments.. It is designed to mount on the surface of a trailer and Camper etc. there's three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved.. Dimension overall length 8 58, The height 3 78 and the total depth is 1 35 Mounting Holes are Approx. 7 by 2 12 Apart.. Easy Installation This light is Surface mount, which means that it installs flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer..

Combination stopturntail light for surface mounting. Equipped with a single L.E.D. diode that varies its' brightness depending upon what function is being utilized. DOT approved for trailers over 80 inches wide. Package contains 1 left side and 1 right side.. 3-316 height x 8-1116 width x 2-14 depth. Hard wire style of connection. 12V DC .34 amps.. 1-78 x 7-38 mounting pattern. Acrylic lens and plastic housing. Hard wired, includes separate ground wire. Black base. Please note - mounting screws are not included..

Unique US Flag Design Rv trailer lights come with four functions,which are running lightturn signal lightBrake lightlicense plate light.Built with US Flag design,upgraded your RV Camper or Trailer a unique and stylish look on the road.IP67 waterproof,the lens and the rear shell are tightly connected with waterproof silicone,50000 hrs life span, could work at all conditions.Upgrade cooling system,maintain 65 after lighting tested over two hours at maximum power.. High Performance LEDsUsed High intensive 57 PCS LEDs in total,each led camper tail light employs 24PCS quality red led chips,one of the led rv tail light built with license plate holder and 9PCS high brightness white leds for license plate,others only have 5PCS leds for license plate Outputs amazing bright and stable RV Tail light. Features better visibility and safety, also add a bonus of charming light for your night trip.. EASY INSTALLATIONThe rv camper tail lights designed with 3 specific colored wires for easy connection.Black wire is negative,Red wire is brake light and turn signal light, and Yellow wire is running light.The license plate light will be also light up,when the running light is on.Come with instructions,and this rv tail lights have mounting holes,which can be installed close to surface of the trailer,usually can be installed within 20 minutes.. Widely Application Travel rv tail light kit fits for most 12V vehicles including Camper, Trailers, semi-trailer, Tractors, Dump trucks, Caravans, UTVs, Pickup, flatbed, UTEs, Boat, special vehicles etc.. Package Contents 2PCSx rv led tail lights 1 Set of screws1PCS of installation instruction .With 12 month warranty and good customer service ..

ENERGY EFFICIENT Multifunction Camper Light Low-profile RV tail light serves 4 function as stop light, turn signal light, taillight. Using advanced LED combination light with better heat distribution, brighter and more energy-efficient than halogen bulbs. This RV camper light Left hand driver's side 29 Diodes 24 Red5 White Right Hand Passenger's Side 24 Diodes this light uses LEDs.. Durable white plastic base with acrylic RED lens, provide better light with less power output bring reliable visibility and safety even in inclement weather.. WATERPROOF Waterproof rate IP67, effectively protects the rv tail light from dust, sand, moisture, rain and other impact of inclement weather. Each lens is sonically welded to the housing and built to ensure maximum durability in working conditions for your vehicles.. Easy Installation Directly mounts on surface of trailer - hardware not included. RV light set come with 3 specific colored wires for easy connection. White wire NegativeGround. White Black Wire Tail Lights White Red Wire BrakeTurn Signal Lights.. Widely Application Ideal for most 12V vehicles including Trailers, Tractors, Semi-Trailer, Dump Truck, Pickup, Camper, UTEs, UTVs, Boat, Caravans, flatbed, special vehicle etc..

Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black recessed base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light. These Recessed Triple Vertical Taillights include 3 red lenses 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White LedsBuilt-in reflex reflector removes the need for a separate reflector This Led triple tail light assemblies can be mounted oriented horizontally or vertically, whatever suits your application. This LED Triple Tail Light is hardwired with 8 wires White is the ground, Blue is backupreverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights NOTE If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal. Overall dimensions Overall length is 14.17 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inch thick, requiring 13.4 inches long x 6.3 inches hole to hole cutout for complete installation. Really a nice slim profile unit. Warranty We truly offer 1 year warranty for these rear tail light combos If you have any questions or issues about our Triple LED Taillights, Please feel free to us and we will reply in 24 hours.

Package includes 2 Pieces led double horizontal mount taillights FULL LEDs featuring a black recessed base with 6 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light. These Recessed double Vertical Taillights include 2 red lenses 1Pc replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White LedsBuilt-in reflex reflector removes the need for a separate reflector This Led double tail light assemblies can be mounted oriented horizontally or vertically, whatever suits your application. This LED Triple Tail Light is hardwired with 5 wires White is the ground, Blue is backupreverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights NOTE If upgrading form halogen bulbs to led, you may need resistors to splice in or you may have hyper flash on your turn signal. Overall dimensions Overall length is 9.5 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inch thick, requiring 9 inches long x 6.3 inches hole to hole cutout for complete installation. Really a nice slim profile unit. Warranty We truly offer 1 year warranty for these rear tail light combos If you have any questions or issues about our Double LED Taillights, Please feel free to us and we will reply in 24 hours.

Multi-function The RV tail lights with tail light, turn signal light and brake light 3 functions, and when the tail light is on, the license plate light will also be on. Using advanced LED combination lights, The lens has good light transmittance, brighter and energy-saving.. Applicable models This RV trailer light is suitable for most 12V vehicles including Camper, Trailers, semi-trailer, Tractors, Dump trucks, Caravans, UTVs, Pickup, flatbed, UTEs, Boat, special vehicles etc.. Good materialThe shell of the RV LED light is made of plastic, the lens and the rear shell are tightly connected with waterproof silicone, which can effectively waterproof, dust-proof, and anti-corrosion, which greatly extends the service life, and can work safely even in bad weather.. Easy installation There are three different color wires on the back of this RV light. The white wire is ground, the red wire is brake light, and the black wire is running light, which is convenient to connect. This RV LED light has mounting holes, which can be installed close to the surface of the trailer, which greatly saves your precious time.. Package Contents 1 x Left side tail light 1 x Right side tail light a pack of screws. One year warranty, please rest assured to buy, if you have any product-related problems, please contact us to provide you with a satisfactory solution..

This Dual LED Trailer Tail Light serves four functions stop light, turn signal light, and taillight, and backup light, this is white LEDs. It is a really nice rectangle led stop turn tail light for the back of your trailer, RV, Camper or motor home. This led taillight is universal design and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on. This Rectangle LED trailer light has a surface mount installation, so it mounts directly on the surface of your trailer, of your application, screws included for mounting. With two reflector strips built in top and bottom, it can be mounted oriented horizontally or vertically, whatever suits your application. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light. This Double LED Trailer Light is hardwired with 4 wires White is the ground, Blue is backupreverse light, red is high mode for stop lights or turn signals, black is low mode for tail lights or running lights. Overall dimensions Overall length is 9.65 inches approx., and overall width is about 6.89 inches, and the light is about half an inch thick, but with the little knob where the wires all come out, it's about 1 inch, so you may need to cut out a hole to allow that to go in. The spot knob is about 0.85 inch in diameter. Really a nice slim profile unit. Package and Warranty package includes 2 Pieces Rectangular LED trailer lights with screwsprovides a replacement taillight for both the driver and passenger side We truly offer 1 year warranty for this LED Double Tail Light If have any questions or issues about our partsam led lights, Please feel free to us and we will reply in 24 hours.

Description Combination stopturntail with backup light and black base. Features Snap-on, replaceable lens and easy to change bulbs. Up to 95.5 Lumens.. Durability All weather molded plastic housing and durable lens build resists corrosion. Included Ground wire included. Usage These tail lights feature superior design and replacement flexibility.