Top 8 Best Supermax Drum Sander

The SuperMax 19-38 Drum Sander includes an open stand, and its drum is prewrapped with 80-grit sandpaper. IntelliSand system automatically controls conveyor speed based on load. Unit uses 110V 20-Amp AC power. Totally enclosed fan cooled 1-34 horsepower drum motor. Sanding drum runs at 1,740 RPM.

Maximum width in 50 two passes. Minimum length in 2-14. Maximum thickness in 4. Minimum thickness in 132. Dimensions in 27D x 46W x 53H on stand. Drum 5 x 25 extruded aluminum. Drum speed 1740 RPM. Dust hood 1- 4 vacuum port, min. 600 CFM recommended. Conveyor motor 43 in. -Lb. Torque, direct drive D. C. Motor, ranged variable 0-10 FPM. Drive motor TEFC 1-34 HP.

Sanding motor 1-12 HP, 110V, single-phase, 15 amps. Drum surface speed 4000 FPM. Conveyor feed rate variable, 0-12 FPM. Maximum stock dimensions 36 wide x 4-12 thick. Minimum board length 6.

Self-Regulating Feed Rates Sandsmart control continuously monitors the load on the drum motor and regulates the speed of the conveyor motor to maintain the highest feed rate without overload. Toolless Adjustments Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed. Efficient Dust Collection Dust hood includes a patented integrated channel that mirrors the shape of the drum and directs chips and dust to the 4 collection port. Protection From Heat Damage Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat. Compact Design Stand features a 20 x 37 footprint to increase stability, and has a storage shelf and predrilled holes for casters.

Automatic Speed Regulation Sandsmart feature continuously monitors the load on the drum motor to prevent an overload situation. Toolless Adjusments Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed. Heat Protection Precision-machined and dynamically-balanced extruded aluminum drum is designed to dissipate heat. Efficient Dust Collection Dust hood has an integrated channel that mirrors the shape of the drum and directs debris to a 4 port. Years of Consistent Quality Die cast drum carriage design is optimized for rigidity. Stability and Mobility Open stand features a 24 x 50 footprint to increase stability, and has a storage shelf and predrilled holes for casters.

SMOOTH FINISH Hard durometer rubber coating on dual steel drums provides flat finish.. VERSATILITY Two-speed gearbox for a wide range of sanding projects.. EFFICIENCY Dual dust ports with directional baffles.. STURDY Full-size cast iron table for solid support.. ADAPTABILITY Independently-adjustable rear drum allows for fine tuning..

Powder coated paint. Minimum board length 9-Inch. Hinged hood. Dual 4-Inch dust ports. Amplifier meter to indicate load.

Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor. Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed -- no tools required. Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position. Dust hood includes a patented integrated channel that directs chips and dust to the 4 collection port. Precision-machined and dynamically-balanced drum is designed to dissipate heat, and protect the work surface from heat damage. Redesigned conveyor system pulls the workpiece through the sander instead of pushing.

Sanding motor 1-12 HP, 115V, single-phase, 13A. Conveyor motor 18 HP, single-phase, 0.3A. Feed rates Variable 2.47-17.3 FPM. Drum surface speed 2127 FPM. Max. stock dimensions 12W x 3-12H.

Line Finishing Tool this is a versatile tool that works on variable speed, offering a wide variety of line finishes on metallic surfaces. This finishing tool produce a consistent and uniform finish even under load. Power Tool surface finishing tool is upgraded with powerful and highly efficient motor that performs even toughest surface conditioning job with ease. Applications sanding tool can be used for graining, cleaning, and producing decorative finishing, industrial-grade line-finishing on cast iron, stainless steel, steel, and non-ferrous metals. Sanding Drum sander drum can be used with this abrasive finishing tool. The spindle can be locked easily for quick changing of the wheel. Side handle is given for added safety and speed control. Specifications the speed of the motor ranges from 1,000 to 3,800 RPM and it works at 120V on AC mode. The thread size of the spindle is 5811 in. The power finishing tool weighs 13.23 lbs. and can be used with drums having 3-12 to 5 in. diameter.