Top 8 Best Thickness Sander

Sanding motor 1-12 HP, 110V, single-phase, 15 amps. Drum surface speed 4000 FPM. Conveyor feed rate variable, 0-12 FPM. Maximum stock dimensions 36 wide x 4-12 thick. Minimum board length 6.

SMOOTH FINISH Hard durometer rubber coating on dual steel drums provides flat finish.. VERSATILITY Two-speed gearbox for a wide range of sanding projects.. EFFICIENCY Dual dust ports with directional baffles.. STURDY Full-size cast iron table for solid support.. ADAPTABILITY Independently-adjustable rear drum allows for fine tuning..

Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor. Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed -- no tools required. Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position. Dust hood includes a patented integrated channel that directs chips and dust to the 4 collection port. Precision-machined and dynamically-balanced drum is designed to dissipate heat, and protect the work surface from heat damage. Redesigned conveyor system pulls the workpiece through the sander instead of pushing.

Self-Regulating Feed Rates Sandsmart control continuously monitors the load on the drum motor and regulates the speed of the conveyor motor to maintain the highest feed rate without overload. Toolless Adjustments Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed. Efficient Dust Collection Dust hood includes a patented integrated channel that mirrors the shape of the drum and directs chips and dust to the 4 collection port. Protection From Heat Damage Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat. Compact Design Stand features a 20 x 37 footprint to increase stability, and has a storage shelf and predrilled holes for casters.

Maximum width in 50 two passes. Minimum length in 2-14. Maximum thickness in 4. Minimum thickness in 132. Dimensions in 27D x 46W x 53H on stand. Drum 5 x 25 extruded aluminum. Drum speed 1740 RPM. Dust hood 1- 4 vacuum port, min. 600 CFM recommended. Conveyor motor 43 in. -Lb. Torque, direct drive D. C. Motor, ranged variable 0-10 FPM. Drive motor TEFC 1-34 HP.

The SuperMax 19-38 Drum Sander includes an open stand, and its drum is prewrapped with 80-grit sandpaper. IntelliSand system automatically controls conveyor speed based on load. Unit uses 110V 20-Amp AC power. Totally enclosed fan cooled 1-34 horsepower drum motor. Sanding drum runs at 1,740 RPM.

Automatic Speed Regulation Sandsmart feature continuously monitors the load on the drum motor to prevent an overload situation. Toolless Adjusments Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed. Heat Protection Precision-machined and dynamically-balanced extruded aluminum drum is designed to dissipate heat. Efficient Dust Collection Dust hood has an integrated channel that mirrors the shape of the drum and directs debris to a 4 port. Years of Consistent Quality Die cast drum carriage design is optimized for rigidity. Stability and Mobility Open stand features a 24 x 50 footprint to increase stability, and has a storage shelf and predrilled holes for casters.

Powder coated paint. Minimum board length 9-Inch. Hinged hood. Dual 4-Inch dust ports. Amplifier meter to indicate load.

Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning which increases belt life. Quick release lever and tracking control dial are conveniently located for replacing and tracking belts. Belt platen is made from precision-ground steel plate for strength and durability. Graphite covered platen runs cooler increasing machine and belt life. Cast iron table moves up or down to provide exact workpiece positioning. Adjustable outer drum support table enables contour sanding. Tilting sanding head for sanding bevels, angles and flat surface.

SMOOTH CUTS Helical-style cutter head, with easy-to-change blades, provides a clean cuts.. REDUCED SNIPE Precision machined cast iron bed and steel cover assists in keeping boards flat.. POWERFUL MOTOR 2-HP 15-amp motor turns the cutter head at 10,000 RPM.. MAXIMUM EFFICIENCY Dual infeed speed control for either 18 fpm or 26 fpm, maximizes cut efficiency on different wood material types.. FOUR POST DESIGN For maximum control and support of cutter head in reference to work piece and cast table..