Top 8 Best Tp4056 Charging Module

HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board. Input Voltage 5V. Charging cut-off voltage 4.2V 1. Maximum charge current 1000mA.

Input Voltage 5V Max output current 1A Charging cut-off voltage 4.2V 1 Input interface Type-C USB. Power Indicator Red is charging, Green is fully charged.. ApplicationIt can charge for single-cell lith ium battery or multi-section parallelled lith ium batteries, can be powered by USB ports The module with usb port, can be directly input to do with rechargeable lith ium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.. NotePlease check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.. Package includes15TP4056 Type-C USB Charging Module.

Input interface Type-c USB.. Battery overcharge lifting voltage 4.00 V. Battery over-current protection current 3 A. Maximum charging current output 1000 ma. Light state no load the light not bright, red light for recharging, is full of green light..

Input interface Type-C USB.. Battery overcharge lifting voltage 4.00 V. Battery over-current protection current 3 A. Maximum charging current output 1000 ma. Light state no load the light not bright, red light for recharging, is full of blue light..

Package contents you will get 40 pieces charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace. Functional usages input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A Connect the battery to the B B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full. Product information the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY Charging cut-off voltage 4.2V, max charge current 1000 mA. Applicable occasions the battery charging board is suitable for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate. Warm notice please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board.

What you receive there are 20 pieces charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace. Details the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY Charging cut-off voltage 4.2V, max charge current 1000 mA. Function introduction input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A Connect the battery to the B B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full. Suitable occasion the battery charging board is applied for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate. Notice please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board.

Input interface Type-c USB. Maximum charging current output 1000mA. Battery overcharge lifting voltage 4.00 V. Battery over-current protection current 3 A. Charging cut-off voltage 4.2V 1.

TP4056 Charging Module Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery, And still retains the input voltage wiring pads, can be very convenient DIY. Charging cut-off voltage 4.2V 1 Maximum charge current 1000mA. TP4056 Charging Module Input voltage 5V Battery over-discharge protection voltage 2.5V Batteryovercurrent protection current 3A Connect the battery to the B B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full. The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly. 2A 5V Charge Discharge Integrated Module MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode low level trigger ground . 4 in 1 Charging Discharging Lithium Battery Protection Battery Level Indicator Module. Lithium battery protection function over-current, overvoltage, over-temperature, short circuit protection. 2A 5V Charge Discharge Integrated Module In discharge mode The charging mode KEY function is invalid, trigger the KEY port once to open the output continuously trigger the KEY port twice to close the output. The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds if the load is greater than 50MA, the output will be automatically turned on. Allow discharge while charging. Note At this time output voltage 4.7 5V. We Have a Strong After-sales Service Team As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope How to email us Plz click MakerFocus and click JoohcUngir to email us Looking forward to your consultation.

Material Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging.. Features Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device.. Instructions for use TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN port input 5V solar panel, BAT port can output 4.2V to charger 3.7V 18650 battery.. Small and delicate 1.3in0.92in33mm23mm. Package contains 6 Lithium Li-ion Battery Charger Module.

The input terminal has a Type-c USB female socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.. There are solder joints for input voltage wiring, which is convenient for DIY.. Two-in-one charging and discharging protection function.. No load the light not bright, red light for recharging, is full of green light.. Note When the battery is connected for the first time, the protection circuit can be activated by charging it with 5V voltage..