Top 8 Best Usb Port Tester

3 to 20V DC Current 0.05 to 3A USB-A 3 to 20V DC Current 0.05 to 5A USB-C. Continuously monitor up to 1000 hours of voltage, current, capacitycharge delivered, energy, and resistance calculated. Tests most common standard USB-A or USB-C ports, including Qualcomm Quick Charge ports. Store and recall up to 10 readings. Voltage and current overload detection. Hi-resolution LCD for clear visibility in environments with low ambient lighting. Device must be used in line between source being measured and power source.

Multi-function tester Real-time detection of the state of charge, voltage, current, capacity, electricity, power, equivalent impedance, temperature and other indicators of electrical appliances at a glance. Measuring voltage 3.7V-30V measuring current 0-4A. The tester is widely used in the quality inspection of 3C digital peripheral products, and is the first choice for digital 3C digital game enthusiasts and electronic enthusiasts. Fast charging identification, widely compatible AT24 supports QC2.0, QC3.0, i Phone 2.4A2.1A1A0.5A, Andriod DCP, fast charging protocol identification, allowing you to know the charging status of your phone anytime, anywhere. Power-off storage, data guaranteed AT34 has a power-off storage function, which can store capacity and power data when the mobile power supply is powered off, which is convenient for subsequent viewing and facilitates the measurement of the capacity and power of the mobile power supply. Note Other USB testers without power-down storage function cannot test capacity and power. 4-digit accuracy, more accurate measurement measure load equivalent impedance and power thermometer function, free switching between Celsius and Fahrenheit using high-precision thermistor sensor USB 3.0 interface compatible with USB 2.0, support high current test, support USB3.0 Interface mobile hard disk and U disk test. Adopt 0.96-inch IPS high-definition color LCD screen, 160-degree wide viewing angle, high brightness and long service life. Measure the quality of the charger connect the same load, compare no-load and load, the larger the voltage drop, the worse the charger capacity and quality the voltage drop is not obvious or the voltage rises leisure loss compensation function. The better the load capacity, the better the quality.

Multifunctional TesterMultiple ports USB, Type-C and Micro USB for checking the charging status and process of your USB device or Type c device. New upgraded multimeter tester maximum voltage and current 32V5.1A150W, the tester supports a variety of fast charging detection, the process of electrical signal to monitor the charging protocol to meet the various needs of cell phone users. Can also be used to test the capacity and power of mobile power.. Professional safety protection with overvoltage protection, overcurrent protection, undervoltage protection, low energy protection and alarm system. This upgraded USB Type C tester detects safety and maximizes device protection from damage. Automatic output cut-off, audible alarm, sudden power failure to save data.. Newest Upgraded IPS color screen The new upgraded version provides 8 LCD main color screen display interface, key switch display interface. Through the new interface settings, support OTG function, monitor the voltage, current, capacity, power, USB's power, load impedance, DD-voltage and other data of USB or type c supported devices. Switch multiple interfaces with the click of a button. Support 180 degree flip screen, 3 kinds of personalized interface. Wide Application USB tester comes with OTG adapter, supports PD3.0PD2.0, QC3.0QC2.0, BC1.2 and USB A or USB C port, supports newer iPhone 11 Pro phones. Support iphone 11XiPhone Xs fast charging, 29W power, 5V3A 9V3A 12V2.5A 15V2A Compatible with the new MacBook Pro, MacBook, iMac, iMac Pro, Dell XPS, Acer Aspire, HP Spectre , ASUE Zenbook , Lenovo Thinkpad, Eluktronics, Razer Blade Stealth, Chromebook, Microsoft Surface Pro and many more Type C devices and chargers.. BINVAL PROMISE We always believe in stability and continuous improvement of the quality of our products. We trust our products and we offer a worry-free service for 18 months. Feel free to ask our team any questions about use. If you are not satisfied with our products, please feel free to contact our after-sales staff for exchange or refund..

Multiple detection functions of USB C TesterUSB C Tester can monitor the voltage,current,power,resistance,power,capacity,temperature of Micro-usb CableUSB C Cableusb a to usb c CableUSB CUSB A device,charging time,Test Group and fast charging.Check the performance of USB CUSB A charger and USB C Cableusb a to usb c Cable charging speed and quality. It can also be used to find the maximum current of wireless chargers and test the capacity and power of power banks.. IPS Color Display ScreenProvides 9 IPS color screen display interfaces, and the display interface is switched by buttons. USB Tester can detect data such as voltage, current, power, resistance, electricity, temperature, capacity, timing, fast charge, DD-, VV-, etc. It can also detect whether the charger, cable supports fast charging. IPS HD color screen is clearer. Only the Screen rotation interface supports 180-degree flipping of the screen. Test Power BankPhone mAhTest Power Bank, 2 clicks to clear the Tester mAh data, fully charge the power bank, discharge quickly with Load, Cap will show how much mAh Capacity the Power bank has. Multiply by 90. Test the phone, the phone is fully charged, 3 clicks to clear the Tester WH data, the battery is exhausted, WH3.75mAh Capacity x 1000 x 90close to cell phone battery capacity Power bank battery same. Test charger voltage and currentSupport USB A Charger, USB C Charger. Connect Load, adjust the current to the charger support current, if the tester shows that the voltage and current match the charger support current, the quality of the charger is excellent, otherwise the quality of the charger is not good.. Test cable voltage and currentSupport testing Micro-usb cable, usb a to usb c Cable, usb c to usb c Cable. Use a charger with excellent quality after testing, insert the cable, connect the load to test the voltage and current of the cable, if the tester The displayed voltage and current are in line with the current supported by the charger, the cable quality is excellent, and the charging speed is fast otherwise, the cable quality is not good, and the charging speed is slow.. Test whether fast charging is supportedCharger, insert the tester and Load into the charger to adjust the current to 3A, and FCP and FAST appear on the display interface, indicating that the charger supports fast charging. Cable, after connecting the charger, insert the cable into the tester and connect to Load, adjust the current to 3A, the display interface shows FCP and FAST, indicating that the Cable supports fast charging.. WIDE RANGE OF APPLICATIONmust use the OTG adapter Micro-usb adapter that comes with the USB tester, which supports PD3.0PD2.0, QC3.0QC2.0, BC1.2 and USB A or USB C ports , support newer iPhoneiPad Pro and Android phone. Compatible with new MacBook Pro, MacBook, iMac, iMac Pro, Dell XPS, Acer Aspire, HP Spectre, ASUE Zenbook, Lenovo Thinkpad, Eluktronics, Razer Blade Stealth, Chromebook, Microsoft Surface Pro and more USB CUSB A devices and charging device.. Important Tips and 18 Month Warranty ServiceWhen your device does not have a USB port, you can use an alligator clip to clamp the positive and negative poles and convert to USB before testing. When your USB-C device cannot be tested, please insert a small adapter, the small adapter will start the tester. If you receive a defective USB tester or if you have any questions, please contact us first to obtain a valid warranty replacement service for replacement or other assistance..

Parameter --- Input voltage 4-24.000V Input current 0-5.0000A Capacity measurement range 0-99999mAh Energy measurement range 0-99999mWh Load impedance measurement range 0.8-9999.9 Temperature measurement range -10C100C0F200F Default temperature unit Celsius, can be switch to Fahrenheit.. 1.44 LCD Display --- The multimeter has a 1.44 inch LCD high-definition color LCD display, on which real-time display of the charging status of electrical appliances, voltage, current, capacity, energy, power, equivalent impedance, temperature and other indicators are clear at a glance. NOTE The screen can be rotated.. Fast Charging --- Support QC2.0, QC3.0, APPLE 2.4A2.1A1A0.5A, Android DCP, SAMSUNG. NOTE This fast charge protocol identification mode is for reference only as the mobile phone update is faster and cannot be accurately identified.. Load Test --- This detector can be used with our DROK load testers to test the output voltage, current, power and other parameters of the phone chargers, power banks, USB cables, etc.. NOTE --- 1. The meter is covered with protection film to protect the meter from scratching during shipping. Scratches on the protective film are normal, just tear it off. 2. Please connect the USB meter correctly. From USB male port to USB female port, or from Type-C IN port to Type-C OUT port. Dont connect from USB male port to Type-C OUT port. 3. This version doesnt support bluetooth connection..

The tester uses a new generation of power four semi double loop integral converter IC , with a precision bandgap reference , range accuracy , high precision , stable and reliable performance , strong antiinterference ability.. High temperature can be used for measuring USB powered or power consumption of the interface , mobile phone charger , U disk and other products.. Can easily measure the operating current of the output voltage of the USB port and equipment.. Smallsize , no power , and other ancillary equipment, plug and play also detect USB charger output voltage and current are standard suitable for factories, Laboratory and users.. USB powered devices can be used to measure air , voltage loads , USB terminal equipment working voltage and current ..

USB C Tester, 2 in 1 Type C Type A USB Tester Color Screen IPS Digital Multimeter,Voltage,Current,Power,Resistance,Capacity Detector,with clip cable Support QC2.0 5V 9V 12V 20V Qualcomm QC3.0 3.8 12V - 0.2 step, Android BC1.2 5V, Apple 5V 2.4A and MTK-PE 5V 7V 9V 12V. Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance Measuring voltage 3.6V32.0V measuring current 0.005.10A.. USB internal data line before and after the through mode, it can also be compatible with U disk readings and computer USB interface data transfer voltage and current measurement applications, the use of a more extensive range of USB interface can be used.. Featured with over-voltage protection, over-current protection, low-voltage protection, charging time setting and auto-off function, the meter can detect safely and maximally protect the appliances from damaging.. Note The PD charger needs to be connected to your mobile phone, tablet computer, portable computer and other equipment during the test. The usb meter will not be turned on by default when no device is connected..

MULTIFUNCTION Our UT658 series USB testers measures output voltage, current, energy, capacity, circuit equivalent resistance, D and D- voltage of USB data cable, and more. This series is designed to be precise, reliable,stable, and portable.. REAL-TIME MONITORING This USB Detector features with LCD screen can show all the measure digital, easy to see the current and voltage of the devices, and monitoring charging efficiency at any time to protect charging equipment.. HIGH INSPECTION The second generation UT658 series USB testers can inspect USB chargers, portable power sources, data cables and other electronics charging devices.. HIGH ACCURACY This Digital Power Capacity Tester is designed to be accurate, reliable, stable, and portable, and is made of high quality white ABS material, which has excellent insulation and very beautiful.. WIDE APPLICATION This USB Tester can be widely used in varieties of test PCLaptopDesktop ComputerMobile PhonePower BankChargerDischarge LoadCar ChargerCable Measurement..

UPGRADED MULTIFUNCTIONAL USB C POWER METER Detects the charging status and process of your USB-enabled or type c-enabled devices. Supports QC3.0, QC2.0 and BC1.2. A Must Gadget checks the charging performance charging speed and quality of the output wallcarsolar panel chargers and USB charging cables. It can be also used to find the highest current of the Wireless Charger, and test capacity and electric energy of power bank.. PROFESSIONAL SAFETY GUARD Featured with over-voltage protection, over-current protection, under-voltage protection, low energy protection and alarm system. This upgraded USB Type C tester can detect safety and maximally protect the appliances from damaging. It will cut off output automatically and alarm by sound, while it will save data when power off suddenly.. MULTIPLE COLOR SCREEN DISPLAY MODES New upgraded version offers 8 LCD main color screen display interfaces, allowing switching the display interface by pressing the key. With the new interface settings, this instrument can monitor voltage, current, capacity, electric quantity, power, load impedance, DD- voltage and other data of USB.. WIDE RANGE OF APPLICATION Thanks to the PD protocol quick charging mode measurement technology, this new multimeter supports the updated iPhone X mobile phone. Support iphone 8 8P iPhone Xs quick charging, 29W power, 5V3A 9V3A 12V2.5A 15V2A. It also can be applied to test other type C devices, Compatible With Galaxy S10S9Note 10 , ChromeBookPixel, OnePlus and More.. EVERSAME PROMISE We have always believed that a stable and continuously improve product quality. We trust our products and we offer worry-free 18-month. For any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund. WHAT WE PROVIDE 1X USB Tester. Note If the USB Tester doesnt display any parameters, please insert the small adapter being sent with the package into the side hole on the USB Tester, to trigger the PD Charging Function. .

Multi Functional Tester Multiple interfaces USB inputoutput, Type-C inputoutput and Micro USB input,Used to detects the charging status and process of your USB-enabled or type c-enabled devices.Data transfer supported but have limitations,please refer to product description for using details .Supports QC3.0, QC2.0 and BC1.2 ,MTK in different devices. It can be also used to find the highest current of the Wireless Charger, and test capacity and electric energy of power bank.. Safety Protection Featured with Over-voltage protection, Over-current protection, under-voltage protection, low energy protection and alarm system. So, this USB Type C tester can detect safety and maximally protect the appliances from damaging. It will cut off output automatically and alarm by sound, while it will save data when power off suddenly.. LCD Multi-color Display Upgraded version offers IPS HD 9 LCD main color screen display interfaces, allowing switching the display interface by pressing the key. Support English or Chinese Language show, and individual screen display for more visible enjoyment.. Support PD protocolThanks to the PD protocol quick charging mode measurement technology, this new multimeter supports the updated iPhone X mobile phone. Support iphone 13 12 iPhone Xs quick charging ONLY with IOS PD Fast charging adapter and cable. It also can be applied to test other type C devices, such as Samsung Galaxy S9 Plus, Google Chrome BookPixel, OnePlus, HuaWei P9, ect.. OTG Adapter for Free It comes with a OTG adapter,which enables you to expand your USB and Micro USB Function.convert USB input connection port to Micro port by Insert OTG Adapter.We are always at your disposal for solving problems for you,buy with confidence,just place an order..